werfel
Goto Top

Wiederholdender Bluescreen Stop-Fehler luafv.sys PAGE FAULT IN NONPAGED AREA

Hallo!

Ich habe Windows 7 Ultimate 64bit, neben meinem alten Windows XP Home installiert und seitdem tauchen unter Windows 7 des öfteren Bluescreens auf.

Mein System:
-CPU AMD AM3 Phenom II X4 965
-Mainboard AM3 ASUS M4A78T-E (Chipsatz: AMD 790GX / SB750)
-1024MB Sapphire VAPOR-X HD 4890

Die genauen Deteils:


Der letzte Bluescreen Stop-Fehler trat auf nachdem ich den Computer aus dem Standbymodus weckte und die Operaverknüpfung über Objectdock anklickte.

Auf dem Bluescreen stand : luafv.sys PAGE_FAULT_IN_NONPAGED_AREA

Problemsignatur:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7600.2.0.0.256.1
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: 50
BCP1: FFFFF14010746EB0
BCP2: 0000000000000000
BCP3: FFFFF88005A78176
BCP4: 0000000000000007
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Dateien, die bei der Beschreibung des Problems hilfreich sind:
C:\Windows\Minidump\012610-31605-01.dmp
C:\Users\Jan Philipp\AppData\Local\Temp\WER-70091-0.sysdata.xml

Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407

Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txt


Crash Dump File:


Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\012610-31605-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: * Invalid *

  • Symbol loading may be unreliable without a symbol search path. *
  • Use .symfix to have the debugger choose a symbol path. *
  • After setting your symbol path, use .reload to refresh symbol locations. *

Executable search path is:
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c68000 PsLoadedModuleList = 0xfffff800`02ea5e50
Debug session time: Tue Jan 26 17:49:22.139 2010 (GMT+1)
System Uptime: 0 days 0:30:06.824
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*
  • *
  • Bugcheck Analysis *
  • *
*

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff14010746eb0, 0, fffff88005a78176, 7}

* Kernel symbols are WRONG. Please fix symbols to do analysis.

*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
Unable to load image \SystemRoot\system32\drivers\luafv.sys, Win32 error 0n2
* WARNING: Unable to verify timestamp for luafv.sys
* ERROR: Module load completed but symbols could not be loaded for luafv.sys
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Probably caused by : luafv.sys ( luafv+f176 )

Followup: MachineOwner

2: kd> bugcheck
^ Operation not supported by current debuggee error in 'bugcheck'


Zwei Tage davor kam auch ein Bluescreen (von dem ich die Deteils gespeichert habe):

Problemsignatur:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7600.2.0.0.256.1
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: 7e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002D0B93C
BCP3: FFFFF8800330F918
BCP4: FFFFF8800330F170
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Dateien, die bei der Beschreibung des Problems hilfreich sind:
C:\Windows\Minidump\012410-28657-01.dmp
C:\Users\Jan Philipp\AppData\Local\Temp\WER-45661-0.sysdata.xml

Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407

Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txt


Crash Dump File:


Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\012410-28657-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Invalid directory table base value 0x0
Symbol search path is: * Invalid *

  • Symbol loading may be unreliable without a symbol search path. *
  • Use .symfix to have the debugger choose a symbol path. *
  • After setting your symbol path, use .reload to refresh symbol locations. *

Executable search path is:
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c63000 PsLoadedModuleList = 0xfffff800`02ea0e50
Debug session time: Sun Jan 24 14:43:22.338 2010 (GMT+1)
System Uptime: 0 days 3:20:15.572
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image ntoskrnl.exe, Win32 error 0n2
* WARNING: Unable to verify timestamp for ntoskrnl.exe
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Unable to add module at ffffffff`ffffffff

Loading User Symbols
Missing image name, possible paged-out or corrupt data.
Loading unloaded module list
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
..Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
..Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.Missing image name, possible paged-out or corrupt data.
.
*
  • *
  • Bugcheck Analysis *
  • *
*

Use !analyze -v to get detailed debugging information.

BugCheck 7E, {ffffffffc0000005, fffff80002d0b93c, fffff8800330f918, fffff8800330f170}

* Kernel symbols are WRONG. Please fix symbols to do analysis.

*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Probably caused by : ntoskrnl.exe ( nt+a893c )

Followup: MachineOwner



Ich hoffe ich habe alles nötigen Informationen gegeben...


Könnt ihr mir helfen?


Jetzt schon mal vielen Dank für Eure Antworten!

Content-Key: 134423

Url: https://administrator.de/contentid/134423

Ausgedruckt am: 29.03.2024 um 05:03 Uhr

Mitglied: datasearch
datasearch 26.01.2010 um 23:28:35 Uhr
Goto Top
Die Datei ist Teil des UAC Subsystems. Genauer, ein Bestandteil der unter anderem einer laufenden Anwendung ein "virtuelles Dateisystem" bereitstellt, das nur die nötigsten Systemdateien und Verzeichnisse für diese Anwendung enthält. Irgend etwas verursacht bei diesem Filter einen Crash. Unter anderem laufen der Internet Explorer und die Windows Sidebar in diesem Modus. Testweise Sidebar und danach UAC deaktivieren. Eventuell ein Ansatz zur Fehlersuche. Vorsichtshalber würde ich aber mal eine Systemdateiprüfung (sfc /scannow) und einen Speichertest laufen lassen.

Was deinen Debugger angeht, dir fehlen die Symbole.
Mitglied: werfel
werfel 28.01.2010 um 18:45:12 Uhr
Goto Top
Hallo!
Ich habe alle Minianwendungen ausgeschaltet und einen Arbeitsspeichertest durchlaufen lassen, aber grade gab es wieder einen Absturz, während ich ein Video konvertierte (1 von 4 Prozessoren 100% ausgelastet)

Problemsignatur:
Problemereignisname: BlueScreen
Betriebsystemversion: 6.1.7600.2.0.0.256.1
Gebietsschema-ID: 1031

Zusatzinformationen zum Problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Dateien, die bei der Beschreibung des Problems hilfreich sind:
C:\Windows\Minidump\012810-29593-01.dmp
C:\Users\Jan Philipp\AppData\Local\Temp\WER-47377-0.sysdata.xml

Lesen Sie unsere Datenschutzbestimmungen online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0407

Wenn die Onlinedatenschutzbestimmungen nicht verfügbar sind, lesen Sie unsere Datenschutzbestimmungen offline:
C:\Windows\system32\de-DE\erofflps.txt


Hier die Debugger Infos:
(Wie kann ich das Problem mit den fehlenden Symbolen beheben?)


Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\012810-29593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: * Invalid *

  • Symbol loading may be unreliable without a symbol search path. *
  • Use .symfix to have the debugger choose a symbol path. *
  • After setting your symbol path, use .reload to refresh symbol locations. *

Executable search path is:
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02c05000 PsLoadedModuleList = 0xfffff800`02e42e50
Debug session time: Thu Jan 28 17:21:56.476 2010 (GMT+1)
System Uptime: 0 days 0:19:39.772
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
* ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*
  • *
  • Bugcheck Analysis *
  • *
*

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

* Kernel symbols are WRONG. Please fix symbols to do analysis.

*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
* *
* *
* Your debugger is not using the correct symbols *
* *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* *
* Type referenced: nt!_KPRCB *
* *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
*
  • Symbols can not be loaded because symbol path is not initialized. *
  • *
  • The Symbol Path can be set by: *
  • using the _NT_SYMBOL_PATH environment variable. *
  • using the -y <symbol_path> argument when starting the debugger. *
  • using .sympath and .sympath+ *
*
Probably caused by : ntoskrnl.exe ( nt+71ed0 )

Followup: MachineOwner