23.10.2005, aktualisiert am 29.10.2008

24575

110

Adaptec 39320A-R von Dell Bios auf Adaptec Bios flashen?

Moin zusammen...

ich habe einen Adaptec Scsi Controller 39320A-R allerdings befindet sich auf der Karte ein Dell Bios V4.30.4s5.

Dieses Bios ist abgestimmt auf die hauptsächliche Verwendung der Karte als Raid 0 & 1 controller

Ich möchte diese Karte jedoch aussließlich als ganz normalen SCSI Controller, also ohne jegliche Raid Varianten benutzen.

Normalerweise ist bei diesem Controller über die Bios Software "Adaptec SCSI SELECT" eine Auswahl zwischen normalem SCSI Controller Betrieb und Raid Betrieb möglich.
Nicht jedoch bei der instalierten Firmware (Bios) Version V4.30.4s5 von Dell.
Hier sind diese Schalter im "Adaptec SCSI SELECT" einfach nicht vorhanden.

Die Original Bios Version von Adaptec hierfür ist die V4.30

Leider lässt sie sich weder über das Adaptec DOS Tool "flash6.exe" (meldet passende Karte nicht gefunden)
noch über das Dell DOS Tool "scsiutil.exe" (meldet cheksum error seitens des Bios File) installieren.

Ebenso verlief es mit der Adaptec Biosversion V4.25
Nur dieses Dell Bios scheinen die Flashtools immer wieder gerne anzunehmen.

Hat jemand eine Idee wie ich das ursprüngliche Adaptec Bios auf die Karte Zaubern kann?

Hat jemand eine Idee wie das vorhandene Bios neutralisiert werden kann um auf basis der Hardware defaults
das Adaptec file einzuspielen?

Vielen Dank schonmal...

Bitte markiere auch die Kommentare, die zur Lösung des Beitrags beigetragen haben

Content-ID: 18260

Url: https://administrator.de/forum/adaptec-39320a-r-von-dell-bios-auf-adaptec-bios-flashen-18260.html

Ausgedruckt am: 23.12.2024 um 08:12 Uhr

110 Kommentare

Neuester Kommentar

Moin zusammen...

Habe das Problem gelöst.. freu

folgende Vorgehensweise sollte für jeden mit Ähnlichem Problem funktionieren.

Mann schnappe sich die scsiutil.exe aus dem Dell Bios Update.zip und sichere zunächst einmal
das vorhandene BIOS und das vorhandene SEEPROM aus der Karte auf die Bootdiskette.

Jo und als nächstes braucht man unbedingt das SEEPROM file einer nicht OEM Karte!
Diese Files sind im Net kaum zu kriegen und sollten der Einfachheit halber aus einer
orig. Karte mittels scsiutil.exe (oder Uniflash.exe V1.4 oder seeprom.exe) auf eine
Diskette ausgelesen werden.

Mit diesem Original SEEPROM File bespielt man jetzt das SEEPROM seiner OEM Karte.
Neusstart
Jau und dann kann mann auch sofort und einfach das Original Adaptec Bios aufspielen.

Da die einzelnen Bios und SEEPROM Files ja gespeichert wurden ist eine Rückrüstung
ebenfalls einfach möglich. Habs ausprobiert klappt alles wunderbar.

Nur zur Rubrick Leergeld:

Es führt definitiv zu einer nicht mehr Funktionierenden Karte wenn man zunächst das
BIOS löscht und danach den Inhalt des SEEPROM löscht um dann auf irgendwelche
Hardwaredefaults zu warten mittlels welcher die Karte vieleicht neutralisiert werden könnte.
Nee die sitzen sowohl im Bios als auch im SEEPROM. Is beides wech is Schicht im Schacht.

Dann hilft einem jedoch:

"Hecki" Eckart Prause
Rathausstraße 17
D-25361 Krempe
bioskomp@gmx.de
Die BIOS-Seite im Internet:
http://www.bios-info.de
http://www.bios-kompendium.de http://www.bios-info.de/burning/bwelcome.htm

Der Mann is ein absoluter Hit am Lötkolben.
Er lötet das Bios raus bespielts grad mit ner Firmware, setzt nen Sockel aufs Board
da kommt dann der Chip wieder rein. Karte wird beim Start gefunden.
Jo noch kurz den SEEPROM flashen und gut is.

Abschliessend: So sollte es auch mit anderen OEM Karten funktionieren sofern die
Hardware 1:1 identisch ist. (unterschätzt mir den SEEPROM nicht) hihihi

Bis denn dann...

I am writing in english, because my german i terrible - and I hope that is OK. I can read german, but my writing is horrible..

I have the exact same problem with my Dell OEM card, and desperately need the SEEPROM file from a standard Adaptec card.

Does anyone have such a file and can send it to me, or direct me to an address I can download it from??

Thanks!

Hi - I also desperately need these files - could anyone send them to me too? thanks!

Well how about an Email Contact?

Whoops! Sorry. It's mike@burst-tv.net

Hm.. u should have Mail....

Can I please have a copy, too? kjetilho@kaksi.ifi.uio.no ?

Hallo,

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: adm-de@mvdhoeven.com ?

Herzlichen dank!
Mathieu

hallo auch ich bin an dem seeprom interessiert vielen Dank schon mal im voraus.
newsk@gmx.de

Hi @ all,
moin zusammen,

i heard that most of the Questioners got Mail...
die meisten anfragenden haben scheinbar Post bekommen...

Please send further File request via PM or Mail to those Members... thx a lot...
Seit so gut und fragt künftig diejenigen die dies File bereits haben via PM oder Mail...

See U..
Bis danner..

Hi can I please have the files too. I had this card for years and now I can finally get another 15k drive in my system?!?!? Please send me the files or I'll kill myself...lol...thx!!!

No problem, send an email to me. I'll send the necessary files to you...

hallo auch ich bin an dem seeprom interessiert vielen Dank im voraus.

Hi can I please have the files too, im runnen VMware ESX 3.5 and i have to disable the hostraid function before VMware can access the disk.

Thx Jan van Bruggen

Hi, I really need this too. I have a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID to make my Infortrend RAID unit work.

I'd be very grateful if you could send this file to pompeypete@gmail.com

Thank you.

Pete,

You have mail, good luck

Hello,
I'll send the necassary files, but some guys have no valid emailaddress. So I always get failjure notice. For example the google gmail.com adresses do not work if there is a file attached to an email...
And so on....
Please take a look to your emailsettings...
Please only ask for this files with valid and checked mailaccounts...all other mail addresses were immediatly blocked...by my servers..and you'll never get an answer again.
Thank you!

newsk@gmx.de

Thank you so much for sending me the file. I can't thank you enough! I will let you know if it works or not.

Best Regards
Peter Jackson

Hi chaps.

I've got the same Dell branded 39320-r with the same bios, it's been driving me nuts trying to disable the hostraid.

Any chance one of you guys could forward me the files and details.

Much appreciated, my email address is blizzardppc@btinternet.com

Blizzard,
You have mail, good luck

Hi, would you please send me a copy too. I would like to install Solaris 10 on a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID.

I would be very grateful if you could send the file to numeric@causewaybay.hk

Thank alot,

Numeric

Hi, I got your files. Thanks for your great help.

Cheers,
Numeric

Hi, I follow the readme to flash the ROM, however it alerts that the rom is not compatible with my RAID card. My card is 39320 (without A), do you know if there is any turnaround to do that?

Thanks alot,

Numeric

Normally I need a picture to identify your controller.
But in deed there are controllers 39320-R without A or D....
With 39320-R or 39320D or 39320D-R these files do not work....
I told you to read readme.txt carefully...
The first line is:
Instructions for updating the ROM files on Adaptec 39320A SCSI Adapter

When you updated your seeprom without making a backup copy and you restarted your computer it is possible your controller is unusable now....

Last line readme.txt :
Warning....it is possible that your Adapter becomes unusable after thie procedure....

Thanks. I will check if I can provide photos or more information.

Actually it is an OEM come with Dell SC1425.

You are right, I have backup the BIOS and the SEEPROM, so I can recover it and get it working.

Preston,

did u got the files yet?

Please write the complete name of your controller.
There are several diffrent dell oem controllers, not all can be patched by the available files.
I'm able to send you original adaptec seeprom files and the necassary util for flashing these files.
Files available for 39320A and A-R
or I'm able to make a backupcopy for 39320D or D-R....

For all other Dell OEM cards I've no original adaptec seeprom file. So it is not possible to flash the original biosimages provided by adaptec.

If you need these files write an email to newsk@gmx.de
I'll answer as soon as possible.

Be careful and read the readme.txt.... It is possible to make your controller unusable .... when it is unusable you must solder out the seeprom and programm with an eeprom programmer and this is no fun....

Thanks for your help. I have checked with Dell. They replied that it is Adaptec SCSI Card 39320A-R.

I would be very grateful if you could send me the files to numeric@causewaybay.hk

Can you please send me the files to kane8@cox.net.

Thanks

Kane

Zitat von @caustic1q:

Please write the complete name of your controller.
There are several diffrent dell oem controllers, not all can be
patched by the available files.
I'm able to send you original adaptec seeprom files and the
necassary util for flashing these files.
Files available for 39320A and A-R
or I'm able to make a backupcopy for 39320D or D-R....

For all other Dell OEM cards I've no original adaptec seeprom
file. So it is not possible to flash the original biosimages provided
by adaptec.

If you need these files write an email to newsk@gmx.de
I'll answer as soon as possible.

Be careful and read the readme.txt.... It is possible to make your
controller unusable .... when it is unusable you must solder out the
seeprom and programm with an eeprom programmer and this is no fun....

Hello,

I want to use the Dell SCSI Raid controller with Vista 64 bit. I own the Dell 39320/dell controller it's a PCI-X. The controller works fine with the std Adaptec driver under Windows XP. If I install the Adaptec driver for 64 bit Vista, the system crashes to blue screen. So i think, I have to change the Bios to the original Adaptec one. So please send the files to friedrich-w@gessnernet.de. This will be very helpful for me.
Thanks.

Logist

Can anyone send me (riccardo@thevalentes.net) the eeprom files (and instructions) to flash a Dell OEM 39320? I need to disable HostRAID in order to run ESX. Sorry for writing in English but my German is very poor.

Thanks
riccardo

Does anyone has SEEPROM for Adaptec 39320-R Dell OEM ? Please email me to redfox99@hot.ee
Thank you

u have mail

good luck and be carefull

Hier kommt nochmal eine Anfrage fuer das SEEPROM fuer ADAPTEC 39620 DELL-OEM. Hoffensicht seid ihr es noch nicht leid das zu versenden! Meine e-mail: hans.wilden@orange.fr Vielen Dank fuer eure Hilfe

u 2 have mail

good luck and be carefull

Riccardo, u still need it. Or someone sent it to u.
If u like i can sent it to u

OK, have received e-mail with files and instruction. Will use it later in the day
Thank you very much and happy New Year.
Hans-Georg

Riwithiy -

no I haven't got the files, could you please email them to me?

Many thanks

Then u2 have mail, good luck and be carefull.

Thank you for the files

Only these files are for 39320A-R card, my card is 39320-R (device ID 8095). This also works with 39320A-R BIOS, but do you have 39320-R SEEPROM ? Thank you

Can someone also send me the SEEPROM and instructions for an Adaptec 39320-R Dell OEM ?

My email address is: milesajm-firmware@yahoo.co.uk

Many thanks and really sorry for using English,

Andy

Shenique,

Could I also get the file/s (I believe Riwithiy sent you last so I'm joining the loop) as I also have DELL 39320 which I’d like to behave like a normal 39320R.
Thanks

lloydie_p at yahoo dot co dot uk

Then u2 have mail, good luck and be carefull.

Hallo,
ich habe da das gleiche Problem. Bei mir lässt sich WinXP dadurch nicht intalieren!
Ich hätte auch gern auch die Datei (SEEPROM) und hoffe dass es dann funktioniert

Ich hoffe es nerven dich die Anftragen nicht schon
und ich bekomm es trotzdem:
Mail an :
M.Herweg@nefkom.net

Vielen lieben Dank
Manfred

Hi,

I haven't received any files or instructions yet. Please could you you send them to me too?

Here is my address again:

milesajm-firmware@yahoo.co.uk

Many thanks,

Andy

Andy,
U have mail, good luck.

Hallo,

would you like also send me the file/s "seeprom" and the Flash Utility, as I also have the problem with 39320A -DELL

Thanks very much
Manfred

My e-Mail:
M.Herweg@nefkom.net

Thank you very much.

After the update the BIOS saw all the drives but would not boot into XP, so as it didn't work I have been able to confirm I have the "R" version. I have reverted back to Dell firmware with no problem. I just have to hope I can find some kind person with a 39320R.

Thanks again for your time to send the files,

Andy.

Hi Andy,
thanks very much for the files.
It work great.
Geetings form Germany.
Manfred

Hi Jan,

Bedankt voor het bestand. Heeft de controller flitste gisteren werkte wonderwel.

Nu kan ik eindelijk de nieuwe computer in gebruik.
Nogmaals, hartelijk dank voor het snelle antwoord en het bestand.

Liebe Grüße aus Nürnberg
Manfred

Graag gedaan, zal nu een prima kaartje zijn. In iedergeval is het nu weer een adaptec-je

Greoetn Jan

Hi, I have a PowerEdge SC1425 with the 39320 card and I need to disable HostRAID.

I'd be very grateful if you could send this file to http://vasily.name/email.png

Thank you,
Vasily

Jan / Manfred,

Ik heb ook zo'n mooie kaart op de kop getikt en kan hem niet gebruiken om hetzelfde euvel...

Zou jij mij kunnen helpen aan de bestanden die nodig zijn om de originele adaptec bios erin te krijgen ?

Alvast bedankt,

Gr.

Etienne

Mail : ebrachel@q-connect.nl

Beste Etienne,

Alles is onderweg, suc6

Jan / Manfred,

Bedankt. voor de rescue, het is allemaal gelukt.

Duizend maal dank !

Gr.

Etienne

can you help me out with the seeprom as well? i'm trying to use my adaptec card with esx and it's not detected because it has the dell dev_id (8095)

my email is evert_unconnected@hotmail.com

thanx!

Evert,

Alles is onderweg, suc6

Gr Jan

how fast are you! i'm going to give it a shot. thanx! :D

Entschuldigen Sie bitte. Ich spreche nicht Deutsch, aber Englisch.

Would someone please send me the files to fix this as well? My e-mail is my user name (spamn8r) at yahoo dot com.

Vielen Dank!

Spamnr8,

it''s olmost in ur email, good luck and do not forget to make a good backup.

Thanks to all those who sent me the files. It worked!!! I was afraid we had wasted $80 on that stupid card. Why does Dell have to cripple it?

Many thanks to all!

James

Hallo,

ich benötige auch unbedingt das SEEPROM File für einen Adaptec 39320A von Dell.
Meine Mailadresse ist mattotaupa@web.de
Vielen Dank für die Mühe!
André

I also have the infamous 39320A-R with Dell Bios V4.30.4s5 and would highly appreciate it if someone would send me the files needed to corssflash the BIOS. (stevenvpelt@gmail.com)

Thanks in advance, Steven

EDIT: Got it from Riwithiy, thanks a billion!!

I want to read-out the seeprom from several adaptec cards but with all cards I just get an empty file (with just 0x00)

I tried these cards:

o Adaptec ASC-39320A (Adaptec Retail)
o Adaptec ASC-39320A (Dell OEM) - With hostraid
o Adaptec ASC-39320A (Dell OEM) - Without hostraid
o Adaptec ASC-39320A (Dell OEM) - With hostraid, 1 internal & 1 external connector
o Adaptec ASC-29320LP (HP OEM)

I used the seeprom.exe v1.0 Alpha7

When I try to read the seeprom then I get a few time-out messages whereafter it reads the 2Kbyte seeprom with only 0x00 chars

I tried it on a older P3 & a brand new HP 8600 workstation with the same result

any idea how to retrieve the seeproms?

Hello , I am also having this problem. Could someone please email me the SEEPROM for the 39320-R <nocain@gmail.com>

Thanks in advance,

-Nick

Could I please get the files for the 39320R as well <nocain@gmail.com>

Thanksx

Hi,

Sorry for the english.

I also have the one of the 39320A-R with Dell Bios V4.30.4s5 is it possible for one of you guys to send me the files to flash the bios back to the original Adaptec firmware, my email address is jon_mansfield_2001@hotmail.com

Many thanks in advance

Jon

Never mind.
Exchanged my card for another one.

Hi,
Please send to me as well this file, I'm having problems with an Precision 380 (39320A). I bought it some time now and still has no OS on it. My email address is radu.moisan@gmail.com Looking forward to see news from you. Thanks in advance.

Hi,

das gleiche Problem, die gleiche Bitte !
same problem, same demand:

piroer@gmx.de

vielen Dank, many Thx,

G.

Tja, also ich bin auch jemand mit demselbem Problem - ich habe einen 39320A (evtl auch -AR aber laut bild sollte es die A variante sein) mit dem Dell Raid bios. Ich benötige den Controller für zwei Bandlaufwerke aber mit dem aktuellen BIOS wird er nicht erkannt. Ich habe natürlich auch schon selbst denVersuch gemacht ein BIOS von der Adaptec-Supportpage zu flashen aber das ging natürlich nicht. Kann mir bitte jemand ein BIOS inkl flashutil an meine email (martin AT cyber-trader.de) schicken.

Vielen Dank

Martin

Martin,

It is almost in your mail, good luck.

u have mail, hope u still can use this

Thanks for the fast help Riwithiy,

the crossflash worked and my ESXi v4 now recognize the controller as a standard Adaptec 39320 controller.

Great job.

Martin

P.S. I wrote a reply but it disappeared. Hope u dont get a double reply

Could you please send me the files needed for DELL OEM C4272 ADAPTEC 39320 39320-R ONE CHANNEL 64BIT PCI-X U320 SCSI

I have version 4.30.4S5 and would like to be able to disable the HostRaid.

Please send the files to forichon@gmail.com

Thanks

I also have the one of the 39320A-R with Dell Bios V4.30.4s5 is it possible for one of you guys to send me the files to flash the bios back to the original Adaptec firmware, my email address is forichon@gmail.com

Many thanks in advance

Jean

Hi,

falls du noch online bist und zeit hast. könntest du mir die files bitte auch mailen... cb@cbxx.org

Jean,

U have mail, good luck and don't forget to make a backup.

CB, it comming your way be carefull and make a backup

Hallo,

ich hätte auch Bedarf.
Falls jemand die Datei hat, bitte schicken an

bertl2004 ät mausoma.de

Merci

Ok, sorry, again in english

I would also need the file(s).

So if anyone has got them, I would be pleased if he/she could send them to me:

bertl2004 ät mausoma.de

Thanks in advance
mausoma

U have 2 mails in the internet freeway

good luck.

Hi, Sorry for also writing in english, I would really apreciate the files too

Regards
Andy

andy at moorefun dot net

Many thanks in advance

I sent you the files.
So now you're responsible for the next to get him the files also ...

mausoma

Worked perfectly, thanks again

Hi, i do not know German ,so sorry for the English.

I have the dell oc4272 scsi 39320 -r (win xp device manager show as asc-39320).
It is a oem raid card and i want to disable the host raid and use it as normal adaptec scsi card in order to install windows 7.
Can anyone give me the bios and the way to make the update ?
And how can i do it because i donot have any of card's cds.

Thank you anyway
Vassilis (vassilis_gr@yahoo.com)

Hi,

Anybody that has the files and can send them ?

Sorry for the english.

Thank you
vassilis (vassilis_gr@yahoo.com)

I have just received an Adaptec ASC-39320/DELL and it won't work in ESXi without disabling HostRAID.

Can I please have the vanilla BIOS files needed for this card so that I can disable HostRAID?

My email is matt (at) mattbrewster (dot) co (dot) uk

Thanks to you in advance

vassilis

U have mail, good luck and don't forget to make a backup.

Matt,

U 2 have mail, good luck and don't forget to make a backup.

Good Evening,

This seems to be the only place that I have found with the proper knowledge to resolve the ASC-39320/DELL issues. I also have the same problem as most of the others in not being able to disable the HostRAID support. Would you be nice enough to email me the required files so that I can fix my card? Please send them to indigogyre on the still functioning yahoo dot com site.

Many thanks!
Dean

Hi all,

to get rid of all these "who sent whom" I uploaded the relevant files to a fileshare provider.

Download ...
http://www.4shared.com/file/167086373/143ee63/disk.html
http://www.4shared.com/file/167086375/e8204b56/HowTo.html
http://www.4shared.com/file/167421105/e8136bf1/image.html

... make a boot device using an disk image (image.html) via winimage or equivalent
... or use an existing boot device using the files (disk.html)

... then follow the howto.

Good luck, use at your own risk

Lol, simple and no one thought doing this ha ha, good job.
greets Riwi

Thanks to this forum I got my Adaptec card working, so I thought I would take a few images of the process and create a "how to" for other people in the future. I've also made the disk/images files available, should the links above ever go dead.

My guide (and pictures) can be found here: http://www.randomsnippets.co.uk/2009/12/disable-raid-on-adaptec-39320-w ...

Merry christmas to everyone

Holiday Gretings!

I wanted to thank everyone for the information and the links to the files. Thanks to this information I was able to reflash my ard and it is now working properly with the applications I needed. It was a very simple process. This is a very useful site and I wish I could read german to better utilize it.

Happy Holidays!

Dean

Guten Tag!

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: ibdima@web.de ?

Herzlichen dank!
Dmitri

Zitat von @Kpt.Chaos:

Moin zusammen...

Habe das Problem gelöst.. freu

Guten Tag!

Ich möchte auch gern diese original SEEPROM haben.
Können Sie es bitte schicken an: ibdima@web.de ?

Herzlichen dank!
Dmitri

Hi - I also desperately need these files - could anyone send them to me too? thanks!

Guten Tag!

auch ich würde mich über das original SEEPROM freuen.
das.goldene.lamm@gmail.com

Herzlichen dank!

DGL

---
Hi,

i also desperately need these files.
Could anyone send them to me too?
das.goldene.lamm@gmail.com

with kind regards

DGL

Hello everybody,

leider ist ja die Seite mit der ANleitung randomsnippets down.

Ist SE39320 noch irgendwo verfügbar? Würde das org. seeprom auch gerne haben...
buka.jay@web.de

Büdde! Danke!
cheers

Servus buka jay,

also wenn du es möchtest ich habe es noch.
Ich schike es dir an dein E-MAiladresse

Gib kurz bescheid obs angekommen ist.

LG
Manfred

So: habe Dateien erhalten & Karte erfolgreich geflasht

Danke an Alle & Grüße
buka J

Hallo RaupeNimmersatt,

handelt es sich um die erforderliche SEEPROM-Datei für den Adaptec SCSI Controller 39320A-R mit dem Dell Bios V4.30.4s5?

Dann wäre auch sehr interessiert!

Your webpage may have disappeared even faster than the links above...

Was meinst du??

Ich meinte, dass seine Webseite ( http://www.randomsnippets.co.uk/2009/12/disable-raid-on-adaptec-39320-w ... ) und ihre Dateien möglicherweise früher als die Links zu www.4shared.com erloschen waren.

Sehr geehrter Große Geist,

haben Sie noch die SEEPROM-Datei?

Wenn ja, können Sie mir bitte die Datei an die folgende E-Mail-Adresse schicken?
antikapitalista1@yahoo.com

Vielen herzlichen Dank!

Martin