David Zehn und Faxdienste

danke für die schnelle Antwort.

die TLD.ini habe ich NICHT verändert. David ist auf frisch installiertem PC frisch installiert. ELSA LANCOM 2000 hat die "neuste" Firmware von 2004.

Die MSN habe ich unter Akzeptierte Eingangs MSNs eingetragen

des verwunderliche ist, dass man bei Anruf sofort ein besetzt Zeichen kriegt.

[COMMON]
;Transport Layer Driver Initialization File for CAPI compatible boards.
;Refer manual for details.

Name = *CAPI COMPATIBLE ISDN CONTROLLER
; Default is none (left blank)
; Specifies the name of the ISDN-Board

;CAPIVersion = 0
; Default is auto detect
; Valid are values 0 to 2
; 0 = Unknown
; 1 = CAPI 1.1 Interface
; 2 = CAPI 2.0 Interface

Controller = 1
; Default is 0 or 1 (see below)
; Specifies the number of the ISDN-Board which is to be used.
; For CAPI Version 1.1 the Controller starts with value 0.
; For CAPI Version 2.0 the Controller starts with value 1.

Routing = 2
; Default is 0
; Specifies the method of inbound routing.
; 0 is for no routing by TLD (CSID)
; 1 is for DDI routing
; 2 is for MSN routing

DDIPrefix =
; Default is none (left blank)
; Takes only effect if Routing = 1
; See documentation for details.

DDILength = 0
; Default is 3
; Valid is 1-5
; Takes only effect if Routing = 1
; See documentation for details.

DDILenOnly = FALSE
; Default is False
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if the TLD should stop receiving DDI Informations if the
; expected DDI Substring has been received. If DDILenOnly is set to True
; the TLD connects more quick.

DDIOffset = -1
; Default is -1
; Valid is 1-10
; Takes only Effect if Routing = 1
; -1 : DDI will be taken from the end of the received DDI String
; 0-10 : DDI will be taken from the stated position within the DDI String

DDIRange = 0 - 0
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Specifies the DDI range the TLD reacts on.

DDIOut =
; Default is none (left blank)
; Takes only Effect if Routing = 1
; Only necessary for some special PBX

TxMSN = 0
; Default is 0
; Only necessary for some special PBX.

RxMSN = 949840718
; Default is none (left blank)
; Specifies the Multi Subscriper Numbers the TLD.NLM reacts on.
; Multiple MSN's can be specified, seperated by a comma
; See documentation for details.

DebugMode = 3
; Default is 3
; Specifies the depth of technical information recorded.
; Valid is 0 - 5
; 0 is for none
; 1 is for important messages only
; 5 is for any capi message

IsULaw = FALSE
; Default is False (Use A-Law)
; Specifies the local ISDN Voice coding format
; Valid is True or False
; In Europe A-Law is used, in america æ-Law.

AnswerDataCalls = TRUE
; Default is True
; Valid is True or False
; Specifies if datacalls (FaxPlus) should be answered by TLD.
; This parameter has to be set to FALSE if you want to run e. g. a MPR
; and the TLD on the same ISDN Controller.

;===========================================================================

;TimeOut = 60
; Default is 60
; Specifies the time (in seconds) before timeout message appears.

;ISDN_Service_FaxG3 = 1
; Default is 1
; Specifies the service which is used for outgoing fax (Group 3)
; 0 is for a/b services
; 1 is for analog phone

;DynamicCSID = True
; Default is True
; Valid is True or False
; Takes only Effect if Routing = 1
; Defines if a received DDI should be mirrored within the CSID.

;WaitForDisconnect = False
; Default is False
; Valid is True or False
; Defines if the TLD should not force disconnection at the end of fax.
; This parameter is necessary for Dr. Neuhaus 3009 Hybrid boards.

;HeaderLineFeed = 0
; Default is 0
; Valid is 0-37
; Specifies the number of pixel lines left blank before sending fax
; image. To avoid overlay with David headline.

;DefaultFaxPlus = False
; Default is False
; Valid is True or False
; Defines if the TLD should try to establish a FaxPlus connection first.
; True is for try FaxPlus before G3 call
; False is for no FaxPlus

;HandleUnloadEvent = True
; Default is True
; Valid is True or False
; Specifies if the TLD should ask for confirmation if the TLD is to be
; unloaded by using the UNLOAD command on the Server Console.
; True is for asking for confirmation
; False is for unloading without confirmation

;MaxTimeActive = 600
; Default is 600
; Specifies the maximum time for a voice connection (in seconds).

;MaxPageSize = 5.242.880
; Defines the maximum permissable size of a fax page. If this value is
; exeeded reception will be aborted.

;Optimized = 1
; Default is 1
; Valid are values 0 to 2
; If Optimized is set to 1, David will create A-Law copies of the played
; WAV files, which will be used in future. The advantage is a better
; system perfomance.

;ProtocolFromEntry = False
; Default is False
; Valid is True or False
; If ProtocolFromEntry is set to True, the CLI instead of the CSID will
; be placed within the From field of the receive log

;BeepOnRx = False
; Default is False
; Valid is True or False
; Specifies if the server should beep on an incoming call.

;FaxTxScript = False
; Default is False
; Valid is True or False
; Specifies if the server will process a fax job by starting the script.

;Script=\\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Default is \\SERVERNAME\DAVID\TLD\COMMON\TLD.DCC
; Specifies the script file that will be used by the TLD.

;BusyCharge =
; Defines a charge unit that will be charged when the distant station is
; busy
; Example: BusyCharge = 12

STATICLINESMSSC = 0193010
; Number for outgoing SMS

STATICLINESMSRECSC = 01930100
; Number for incoming SMS

IHSAutoConfNumber = U‹ì·2J
IHSNUMBER = U‹ì¡,J
IHSHOSTMODEMSN = FALSE
IHSTXNUMBER =
IHSPASSWORD =
IHSINTERVAL =
IHSFROMTO =
IHSTXNOSASU = 0
IHSNOTICETYPE =
IHSTXNOWAIT = FALSE
IHSDOREPLICATION =
IHSREPINTERVALL =
IHSREPARCHIVE =


TIMER = 0
IHSFASTSCAN = FALSE

so da habt ihr mich. CAPI ist eher nicht meine Welt.

ich installiere jetzt einen PC mit FritzCard um das Problem einzuschränken und die Benutzer friedlich zu stellen, heißt aber nicht, dass ich aufgebe.

will das über Lancapi doch gelöst haben.

mfg

So, mit FritzCard geht es, aber ich kriege die Faxe nicht an die benutzer verteilt. die landen alle in unverteilt.