Bildtrommel resetten

Hallo,

Wenn es nicht in den Benutzerhandbüchern erklärt sit, es gibt noch Lektüre speziell für Techniker und Co. der Supportfirmen, nur ist das daran kommen schon eine eigene Herausforderung da per Vertrag die weitergabe eben nicht erwünscht ist. Musst du notfalls alle Webseiten dieser Welt durcharbeiten, oftmals findet sich da etwas.

Gruß,
Peter

Google wieder im A....?

How to Reset the Drum on an OKI Data Laser Printer

Step 1

Power off the printer if you have not already done so. Press and hold the up and down arrow buttons simultaneously as you press the "Power" button to restart the printer. The “OKI USER” prompt appears on the LCD display screen.

Step 2

Press the down arrow button near the LCD display a few times until the Engine Dialog Mode option appears on the menu screen. Press the “Enter” button, and then wait for the “Diagnostic Mode xx.xx.xx S-Mode” prompt to appear.

Step 3

Press the down arrow button to scroll the menu options until the “NV-Ram initial” prompt appears, and then press “Enter.” “NV-Ram- Initial Table 1” appears on the LCD display.

Step 4

Press and hold the “Online” and “Enter” buttons simultaneously for approximately 10 seconds and wait for the “Executing Reset” message to appear on the display screen. Release the "Online" and "Enter" buttons after the message appears.

Step 5

Power off the OKI Data laser printer, and then turn it on again. The drum page count resets to zero

Download Service Manual:
https://elektrotanya.com/oki_c5450_c5400_c5250_c5200_c5150_c3200n_c3200_ ...

Oder mit Mainentance Utility:
http://dorkythorpy.blogspot.com/2012/04/oki-c3300-toner-and-drum-counte ...
http://the-environment.org.uk/download_files/OKI_maintennace_utiliity.z ...