Cisco CBS Switch LLDP-MED VOIP

Hallo zusammen

Ich habe auf einem Cisco CBS220er auf dem Port6 ein Mitel VOIP Phone. Per LLDP-Med soll dem Telefon
das VoiceVLAN 1009 zugeteilt werden. Bis jetzt landet das Telefon aber im Default VLAN1008.

Beispiel Konfiguration auf dem Port6

Interface gi6
 switchport trunk native vlan 1008
 switchport trunk allowed vlan add 1009
 spanning-tree link-type point-to-point
 storm-control unknown-multicast
 storm-control broadcast
 storm-control unknown-unicast
 storm-control enable
 description "Client2"  
 lldp med tlv-select network-policy location poe-pse inventory
 lldp med network-policy add 1-7
 loopback-detection enable

LLDP Policys:

ip igmp snooping unknown-multicast action drop
ipv6 mld snooping
ipv6 mld snooping unknown-multicast action drop
loopback-detection enable
lldp med network-policy 1 app voice vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 2 app voice-signaling vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 3 app guest-voice vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 4 app guest-voice-signaling vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 5 app softphone-voice vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 6 app video-conferencing vlan 1009 vlan-type tag priority 0 dscp 5
lldp med network-policy 7 app streaming-video vlan 1009 vlan-type tag priority 0 dscp 5

Via te1 ist der Uplink geht das VLAN1009 direkt zu einer opnsense:

interface te1
 switchport trunk allowed vlan add 1-4094
 spanning-tree link-type point-to-point
 storm-control unknown-multicast
 storm-control broadcast
 storm-control unknown-unicast
 storm-control enable
 description "Uplink Opnsense"  
 loopback-detection enable

Kann mir jemand weiterhelfen?

Danke und Gruss
adminst