30.08.2023, aktualisiert am 31.08.2023

1348

Probleme mit Cisco C3560X - Ersatz-Empfehlung

Hallo,

in unserer gemeinnützigen Einrichtung mit ca. 30 Mitarbeitern, hat bisher eine Cisco C3560X-48P ihren treuen Dienst verrichtet. Leider tut der Switch es nicht mehr, es leuchten noch die ersten grünen Lämpchen, aber kein LAN-Port leuchtet. Ein Reboot verläuft scheinbar normal und auch der dabei durchgeführte LAN-Port LED-Test zeigt, dass alle LEDs leuchten können. Aber nach dem Abschluss des Reboots, sind alle LAN-Port-LEDs tot, nur die oberen Status-LEDs leuchten.

Ob das mit dem Blitzeinschlag zu tun hat, kann ich schlecht sagen. Alle Geräte hängen hinter einer USV und einem Überspannungsschutz und keine anderen Geräte sind betroffen. Vielleicht ist es auch nur ein unglücklicher Zusammenhang.

Habt ihr eine Idee, ob man da noch etwas richten kann? Oder müssen wir sie nach den vielen treuen Jahren zum IT-Grabe tragen ;)

Verbunden damit ist die Frage nach einer Empfehlung für einen neuen Switch. Wir haben noch eine zweite Cisco C3560G-48P im Hause, die im anderen Gebäude als Verteiler fungiert.
Wäre ein Mikrotik Switch empfehlenswert? Wenn ja, welcher?
Oder ein Switch von Unifi? Wir haben bereits deren APs im Haus im Einsatz.

Wir benötigen POE für die VoIP Telefone und APs, VLANs, 24 Ports würden genügen.
Preislich sind wir eher gedeckelt, weil gemeinnützig und spendenfinanziert.

Danke schon jetzt für die Unterstützung.

Bitte markiere auch die Kommentare, die zur Lösung des Beitrags beigetragen haben

Content-ID: 23629600729

Url: https://administrator.de/contentid/23629600729

Ausgedruckt am: 23.11.2024 um 18:11 Uhr

7 Kommentare

Neuester Kommentar

Ein Reboot verläuft scheinbar normal

Scheinbar??? Raten ist in der IT immer nicht so gut...
Was sagt denn der serielle Konsol Output beim Bootprozess wenn du mal ein Terminal (PuTTY) am seriellen Port anschliesst??
Dort wird dir doch anhand der Boot Messages genau gesagt ob es Fehler gibt oder nicht und wenn ja genau welche. Dieser Output wäre sehr hilfreich gewesen für eine Ursachenanalyse.

Habt ihr eine Idee, ob man da noch etwas richten kann?

Auf alle Fälle einmal ein aktuelle Software Image neu flashen! Der Versuch ist es allemal wert bei dem Switch.

Als Alternative kannst du ein gleichartiges Cisco CBS Modell aus deren Billigschiene nehmen enweder 220 oder 250X je nachdem ob du routest (L3 Switching) oder nicht und ob 10Gig ein Thema ist.

Als weitere Alternative kannst du z.B. einen Ruckus ICX-7150-24P nehmen. Der hat die gleiche (Cisco) Konfig Syntax und supportet auch deren proprietäres PVSTP+ Spanning Tree Protokoll.
Einen anderen Switch aus dem Billigsegemnt der kein PVSTP+ oder zumindestens MSTP supportet solltest du in einem bestehenden VLAN segmentierten Cisco Netz besser nicht einsetzen wenn du kein STP Chaos riskieren willst! Siehe u.a. dazu auch hier.
https://www.ebay.de/sch/i.html?_from=R40&_trksid=p4432023.m570.l1313 ...

Zitat von @aqui:

Ein Reboot verläuft scheinbar normal

Du hast vollkommen recht, Schande über mein Haupt :D
Ich war unterwegs und erst heute vor Ort, um eine Serielle Verbindung zu machen. Hier ist das Protokoll:

Initializing Flash...
mifs[2]: 12 files, 1 directories
mifs[2]: Total bytes     :    2097152
mifs[2]: Bytes used      :     755200
mifs[2]: Bytes available :    1341952
mifs[2]: mifs fsck took 2 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes     :    4194304
mifs[3]: Bytes used      :       1024
mifs[3]: Bytes available :    4193280
mifs[3]: mifs fsck took 3 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes     :     524288
mifs[4]: Bytes used      :       9216
mifs[4]: Bytes available :     515072
mifs[4]: mifs fsck took 1 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes     :     524288
mifs[5]: Bytes used      :       9216
mifs[5]: Bytes available :     515072
mifs[5]: mifs fsck took 1 seconds.
mifs[6]: 433 files, 8 directories
mifs[6]: Total bytes     :   57671680
mifs[6]: Bytes used      :   17769472
mifs[6]: Bytes available :   39902208
mifs[6]: mifs fsck took 48 seconds.
...done Initializing Flash.
done.
Loading "flash:/c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  
File "flash:/c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin" uncompressed and installed, entry point: 0x3000  
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 04:26 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02400000

Initializing flashfs...
Using driver version 1 for media type 2
mifs[3]: 12 files, 1 directories
mifs[3]: Total bytes     : 2097152
mifs[3]: Bytes used      : 755200
mifs[3]: Bytes available : 1341952
mifs[3]: mifs fsck took 0 seconds.
mifs[3]: Initialization complete.

mifs[4]: 0 files, 1 directories
mifs[4]: Total bytes     : 4194304
mifs[4]: Bytes used      : 1024
mifs[4]: Bytes available : 4193280
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.

mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes     : 524288
mifs[5]: Bytes used      : 9216
mifs[5]: Bytes available : 515072
mifs[5]: mifs fsck took 1 seconds.
mifs[5]: Initialization complete.

mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes     : 524288
mifs[6]: Bytes used      : 9216
mifs[6]: Bytes available : 515072
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.

mifs[7]: 433 files, 8 directories
mifs[7]: Total bytes     : 57671680
mifs[7]: Bytes used      : 17769472
mifs[7]: Bytes available : 39902208
mifs[7]: mifs fsck took 1 seconds.
mifs[7]: Initialization complete.

...done Initializing flashfs.

Checking for Bootloader upgrade.. not needed
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: MA BIST : Begin
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

POST: SF ASIC BIST : Begin
POST: SF ASIC BIST : End, Status Passed

POST: Switch Fabric Memory Tests : Begin
POST: Switch Fabric Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

front_end/ (directory)
extracting front_end/fe_type_4 (78400 bytes)
extracting front_end/fe_type_3 (78400 bytes)
extracting front_end/fe_type_2 (78400 bytes)
extracting front_end/fe_type_5_0 (594412 bytes)
extracting front_end/fe_type_5_1 (276894 bytes)
extracting front_end/fe_type_5_2 (25142 bytes)
extracting front_end/fe_type_5_3 (85402 bytes)
extracting front_end/app_data.srec (25142 bytes)
extracting front_end/front_end_ucode_info (309 bytes)
extracting ucode_info (77 bytes)
POST: Inline Power Controller Tests : Begin
POST: inline power post failed for port 0
POST: inline power post failed for port 1
POST: inline power post failed for port 2
POST: inline power post failed for port 3
POST: inline power post failed for port 4
POST: inline power post failed for port 5
POST: inline power post failed for port 6
POST: inline power post failed for port 7
POST: inline power post failed for port 8
POST: inline power post failed for port 9
POST: inline power post failed for port 10
POST: inline power post failed for port 11
POST: inline power post failed for port 12
POST: inline power post failed for port 13
POST: inline power post failed for port 14
POST: inline power post failed for port 15
POST: inline power post failed for port 16
POST: inline power post failed for port 17
POST: inline power post failed for port 18
POST: inline power post failed for port 19
POST: inline power post failed for port 20
POST: inline power post failed for port 21
POST: inline power post failed for port 22
POST: inline power post failed for port 23
POST: inline power post failed for port 24
POST: inline power post failed for port 25
POST: inline power post failed for port 26
POST: inline power post failed for port 27
POST: inline power post failed for port 28
POST: inline power post failed for port 29
POST: inline power post failed for port 30
POST: inline power post failed for port 31
POST: inline power post failed for port 32
POST: inline power post failed for port 33
POST: inline power post failed for port 34
POST: inline power post failed for port 35
POST: inline power post failed for port 36
POST: inline power post failed for port 37
POST: inline power post failed for port 38
POST: inline power post failed for port 39
POST: inline power post failed for port 40
POST: inline power post failed for port 41
POST: inline power post failed for port 42
POST: inline power post failed for port 43
POST: inline power post failed for port 44
POST: inline power post failed for port 45
POST: inline power post failed for port 46
POST: inline power post failed for port 47
POST: Inline Power Controller Tests : End, Status Failed

POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed

Waiting for Port download...Complete


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3560X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1439P0N2
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 58:8D:09:5E:B1:00
Motherboard assembly number     : 73-12557-04
Motherboard serial number       : FDO143913XG
Model revision number           : A0
Motherboard revision number     : A0
Model number                    : WS-C3560X-48PF-S
Daughterboard assembly number   : 800-32786-01
Daughterboard serial number     : FDO143901YT
System serial number            : FDO1439P0N2
Top Assembly Part Number        : 800-31328-01
Top Assembly Revision Number    : A0
Version ID                      : V01
CLEI Code Number                : COMJP00ARA
Hardware Board Revision Number  : 0x02


Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 54    WS-C3560X-48P      12.2(53)SE2           C3560E-UNIVERSALK9-M




Press RETURN to get started!


*Mar  1 00:00:04.563: Read env variable - LICENSE_BOOT_LEVEL =
*Mar  1 00:00:06.945: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c3560x Next reboot level = ipbase and License = ipbase
*Mar  1 00:01:06.177: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Mar  1 00:01:07.620: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Mar  1 00:01:10.699: %SYS-6-CLOCKUPDATE: System clock has been updated from 00:01:10 UTC Mon Mar 1 1993 to 01:01:10 CET Mon Mar 1 1993, configured from console by console.
*Mar  1 00:01:10.699: %SYS-6-CLOCKUPDATE: System clock has been updated from 01:01:10 CET Mon Mar 1 1993 to 01:01:10 CET Mon Mar 1 1993, configured from console by console.
*Mar  1 00:01:10.783: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply inserted
*Mar  1 00:01:13.031: %LINK-5-CHANGED: Interface FastEthernet0, changed state to administratively down
*Mar  1 00:01:13.198: %SYS-5-CONFIG_I: Configured from memory by console
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/1 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/2 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/3 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/4 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/5 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/6 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.911: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/7 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/8 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/9 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/10 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/11 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/12 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/13 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/14 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/15 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/16 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/17 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/18 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/19 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/20 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/21 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.920: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/22 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/23 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/24 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/25 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/26 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/27 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/28 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/29 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/30 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/31 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/32 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/33 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/34 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/35 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/36 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.928: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/38 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/39 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/40 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/41 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/42 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/43 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/44 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/45 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/46 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/47 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.937: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/48 can't be brought up because it failed POST in Inline Power test.  
*Mar  1 00:01:13.953: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to down
*Mar  1 00:01:13.953: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan3, changed state to down
*Mar  1 00:01:13.953: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan4, changed state to down
*Mar  1 00:01:13.962: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Mar  1 00:01:13.970: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan5, changed state to down
*Mar  1 00:01:14.230: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Mar  1 00:01:14.524: %LINK-5-CHANGED: Interface GigabitEthernet0/37, changed state to administratively down
*Mar  1 00:01:14.624: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 04:26 by prod_rel_team
*Mar  1 00:01:14.650: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Mar  1 00:01:19.406: %PLATFORM-6-FRULINK_INSERTED: FRULink 1G module inserted.
C3560X-48P-Core>

Es scheinen alle Ports ohne Power zu sein "POST: inline power post failed for port 0"...
Ich habe gelesen, dass ein "IC chip" defekt sein kann, aber wenn alle Ports keinen Strom haben ... Kann man da etwas machen oder ist das ein Totalschaden?

Habt ihr eine Idee, ob man da noch etwas richten kann?

Danke für die Alternativen, schaue ich mir auf jeden Fall an, wenn die alte Dame nicht mehr zu reanimieren ist.

Gruß maeck

Hier ist das Protokoll:

Mit externen Bilderlinks machst du dir hier sicher keine Freunde im Forum.

Lasse den Unsinn, denn Bilder kannst du hier mit einem Klick auf den Bilderlink in Antworten und Threads einbinden. Logs kannst du z.B. in Code Tags hier posten!
Einmal die FAQs lesen hilft wirklich! 🧐

Es scheinen alle Ports ohne Power zu sein

PoE mit "inline power" hast du aber über die Konfig auf dem Port aktiviert, oder?!

Alles klar. Ich habe das Protokoll direkt in Code-Tags eingefügt.

PoE war bisher auf allen Ports aktiv, da hatte ich nichts verändert.
Momentan geht gar kein Port, weder ohne noch mit PoE.

Gut, der PoE HW Test scheitert.

Das kann Software oder ein HW Defekt sein. Du solltest in jedem Falle einmal die aktuelle Firmware neu flashen um Softwarefehler auszuschliessen und einen Reboot fahren.
Deine verwendete Firmware ist zudem ur- uralt und gar nicht mehr supportet!

https://software.cisco.com/download/home/282979305/type/280805680/releas ...

Momentan geht gar kein Port, weder ohne noch mit PoE.

Dazu solltest du einmal mit write erase oder era startup im Admin Mode (enable) einen Factory Reset machen und danach einen Kaltstart. (Power ziehen und wieder stecken)

Kommt wieder dieser Fehler ist von einem HW Defekt auszugehen. Dann hilft dir nur kostenlose RMA wenn du die Ciscos unter Wartung hast oder wenn nicht, dann ein Neukauf eines gebrauchten 3560 bei eBay & Co oder der bereits o.g. Alternativen.

Zitat von @aqui:

Gut, der PoE HW Test scheitert.

Das kann Software oder ein HW Defekt sein. Du solltest in jedem Falle einmal die aktuelle Firmware neu flashen um Softwarefehler auszuschliessen und einen Reboot fahren.

Flash auf die aktuellste Firmware ist erfolgt.

Momentan geht gar kein Port, weder ohne noch mit PoE.

Dazu solltest du einmal mit write erase oder era startup im Admin Mode (enable) einen Factory Reset machen und danach einen Kaltstart. (Power ziehen und wieder stecken)

Factory Reset und Kaltstart ist ebenfalls erfolgt, scheinbar ohne Erfolg. Hier der aktuelle Bootvorgang:

File "flash:/c3560e-universalk9-mz.152-4.E10.bin" uncompressed and installed, entry point: 0x3000  
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.2(4)E10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Tue 31-Mar-20 21:44 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
Using driver version 4 for media type 2
mifs[6]: 12 files, 1 directories
mifs[6]: Total bytes     : 2097152
mifs[6]: Bytes used      : 755200
mifs[6]: Bytes available : 1341952
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.

mifs[7]: 0 files, 1 directories
mifs[7]: Total bytes     : 4194304
mifs[7]: Bytes used      : 1024
mifs[7]: Bytes available : 4193280
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.

mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes     : 524288
mifs[8]: Bytes used      : 9216
mifs[8]: Bytes available : 515072
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.

mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes     : 524288
mifs[9]: Bytes used      : 9216
mifs[9]: Bytes available : 515072
mifs[9]: mifs fsck took 1 seconds.
mifs[9]: Initialization complete.

mifs[10]: 3 files, 1 directories
mifs[10]: Total bytes     : 57671680
mifs[10]: Bytes used      : 26996224
mifs[10]: Bytes available : 30675456
mifs[10]: mifs fsck took 0 seconds.
mifs[10]: Initialization complete.

...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)


FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: MA BIST : Begin
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

POST: SF ASIC BIST : Begin
POST: SF ASIC BIST : End, Status Passed

POST: Switch Fabric Memory Tests : Begin
POST: Switch Fabric Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

extracting front_end/front_end_ucode_info (309 bytes)
POST: Inline Power Controller Tests : Begin
POST: inline power post failed for port 0
POST: inline power post failed for port 1
POST: inline power post failed for port 2
POST: inline power post failed for port 3
POST: inline power post failed for port 4
POST: inline power post failed for port 5
POST: inline power post failed for port 6
POST: inline power post failed for port 7
POST: inline power post failed for port 8
POST: inline power post failed for port 9
POST: inline power post failed for port 10
POST: inline power post failed for port 11
POST: inline power post failed for port 12
POST: inline power post failed for port 13
POST: inline power post failed for port 14
POST: inline power post failed for port 15
POST: inline power post failed for port 16
POST: inline power post failed for port 17
POST: inline power post failed for port 18
POST: inline power post failed for port 19
POST: inline power post failed for port 20
POST: inline power post failed for port 21
POST: inline power post failed for port 22
POST: inline power post failed for port 23
POST: inline power post failed for port 24
POST: inline power post failed for port 25
POST: inline power post failed for port 26
POST: inline power post failed for port 27
POST: inline power post failed for port 28
POST: inline power post failed for port 29
POST: inline power post failed for port 30
POST: inline power post failed for port 31
POST: inline power post failed for port 32
POST: inline power post failed for port 33
POST: inline power post failed for port 34
POST: inline power post failed for port 35
POST: inline power post failed for port 36
POST: inline power post failed for port 37
POST: inline power post failed for port 38
POST: inline power post failed for port 39
POST: inline power post failed for port 40
POST: inline power post failed for port 41
POST: inline power post failed for port 42
POST: inline power post failed for port 43
POST: inline power post failed for port 44
POST: inline power post failed for port 45
POST: inline power post failed for port 46
POST: inline power post failed for port 47
POST: Inline Power Controller Tests : End, Status Failed

POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: PortASIC Macsec Loopback Tests : Begin
POST: PortASIC Macsec Loopback Tests : End, Status Passed

POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed

Waiting for Port download...Complete


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C3560X-48P (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1439P0N2
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 58:8D:09:5E:B1:00
Motherboard assembly number     : 73-12557-04
Motherboard serial number       : FDO143913XG
Model revision number           : A0
Motherboard revision number     : A0
Model number                    : WS-C3560X-48PF-S
Daughterboard assembly number   : 800-32786-01
Daughterboard serial number     : FDO143901YT
System serial number            : FDO1439P0N2
Top Assembly Part Number        : 800-31328-01
Top Assembly Revision Number    : A0
Version ID                      : V01
CLEI Code Number                : COMJP00ARA
Hardware Board Revision Number  : 0x02


Switch Ports Model                     SW Version            SW Image
------ ----- -----                     ----------            ----------
*    1 54    WS-C3560X-48P             15.2(4)E10            C3560E-UNIVERSALK9-M




Press RETURN to get started!


*Mar  1 00:00:07.088: Read env variable - LICENSE_BOOT_LEVEL =
*Jan  2 00:00:06.182: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c3560x Next reboot level = ipbase and License = ipbase
*Jan  2 00:01:34.589: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Jan  2 00:01:34.589: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down
*Jan  2 00:01:42.089: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Jan  2 00:01:50.486: %PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply 1 inserted
*Jan  2 00:02:11.181: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/1 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.181: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/2 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.181: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/3 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/4 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/5 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/6 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/7 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/8 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/9 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/10 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/11 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/12 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/13 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/14 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/15 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/16 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.189: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/17 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/18 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/19 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/20 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/21 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/22 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/23 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/24 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/25 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/26 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/27 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/28 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.197: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/29 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/30 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/31 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/32 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/33 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/34 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/35 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/36 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/37 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/38 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/39 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/40 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/41 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.206: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/42 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/43 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/44 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/45 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/46 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/47 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.214: %PLATFORM_ENV-3-ILP_PORT_POST_ERR: Gi0/48 can't be brought up because it failed POST in Inline Power test.  
*Jan  2 00:02:11.533: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
*Jan  2 00:02:13.018: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.2(4)E10, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Tue 31-Mar-20 21:44 by prod_rel_team
*Jan  2 00:02:15.526: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down
*Jan  2 00:02:16.558: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down

Ein eingestecktes 1G-SFP-Modul funktioniert übrigens problemlos.

Kommt wieder dieser Fehler ist von einem HW Defekt auszugehen. Dann hilft dir nur kostenlose RMA wenn du die Ciscos unter Wartung hast oder wenn nicht, dann ein Neukauf eines gebrauchten 3560 bei eBay & Co oder der bereits o.g. Alternativen.

Die Cisco ist leider nicht unter Wartung

Würdest du, in unserem Falle (gemeinnützig, etc.) noch eine C3560 kaufen? Lohnt sich das?
Oder wäre dann eine CBS250-24P-4X die bessere Wahl?
10G brauchen wir noch nicht, aber vielleicht bald, daher würde ich vorsorglich die X nehmen.