Bound mit KVM für VM
Moin alle zusammen,
folgende Konstellation habe ich, in einem gutem Glaube, mal aufgebaut.
NIC1 \
NIC2 \
// Bond0 > Bond0.12 > virbr12 > KVM > e1000 > Domain (WS2019)
NIC3 /
NIC4 /
Der RootServer (Host) sollte demnach 4 Gigabit ohne Probleme Down- oder Upload durchsetzen können. Beim Host kommen wir jedoch auf nur maximal 116 MB/s und bei der VM schaut es noch schlimmer aus. im Download sind wir bei 1000 Mps und Upload nur 190 Mps.
Hat jemand eine Idee wo mein Fehler sein könnte?
Der Host ist eine CentOS Maschine
BOND0
BOND0.12
VIRBR12
KVM-Domain Konfig
folgende Konstellation habe ich, in einem gutem Glaube, mal aufgebaut.
NIC1 \
NIC2 \
// Bond0 > Bond0.12 > virbr12 > KVM > e1000 > Domain (WS2019)
NIC3 /
NIC4 /
Der RootServer (Host) sollte demnach 4 Gigabit ohne Probleme Down- oder Upload durchsetzen können. Beim Host kommen wir jedoch auf nur maximal 116 MB/s und bei der VM schaut es noch schlimmer aus. im Download sind wir bei 1000 Mps und Upload nur 190 Mps.
Hat jemand eine Idee wo mein Fehler sein könnte?
Der Host ist eine CentOS Maschine
BOND0
DEVICE=bond0
NAME=bond0
TYPE=Bond
BONDING_MASTER=yes
ONBOOT=yes
BONDING_OPTS="mode=4 miimon=100"
NM_CONTROLLED="no"
BOND0.12
DEVICE=bond0.12
BOOTPROTO=none
ONBOOT=yes
VLAN=yes
TYPE=Ethernet
BRIDGE=virbr12
VIRBR12
DEVICE=virbr12
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=static
IPADDR=10.2.12.2
PREFIX=29
GATEWAY=10.2.12.1
NETWORK=10.2.12.0
DNS1=1.1.1.1
DNS2=1.0.0.1
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NM_CONTROLLED="no"
NAME=virbr12
KVM-Domain Konfig
<model type='e1000'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
Please also mark the comments that contributed to the solution of the article
Content-Key: 601916
Url: https://administrator.de/contentid/601916
Printed on: April 19, 2024 at 11:04 o'clock
13 Comments
Latest comment