Fancontrol geht bei Asus Board nicht

# pwmconfig revision 6243 (2014-03-20)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.09 V  (min =  +0.85 V, max =  +1.60 V)
 +3.3 Voltage:      +3.34 V  (min =  +2.97 V, max =  +3.63 V)
 +5 Voltage:        +4.76 V  (min =  +4.50 V, max =  +5.50 V)
 +12 Voltage:      +11.97 V  (min = +10.20 V, max = +13.80 V)
CPU FAN Speed:        0 RPM  (min =  600 RPM, max = 7200 RPM)
CHASSIS FAN Speed: 1315 RPM  (min =  600 RPM, max = 7200 RPM)
CPU Temperature:    +56.0°C  (high = +60.0°C, crit = +95.0°C)
MB Temperature:     +40.0°C  (high = +45.0°C, crit = +75.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +44.0°C  (crit = +100.0°C)
Core 1:       +44.0°C  (crit = +100.0°C)

# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: American Megatrends Inc.
	Version: 0401   
	Release Date: 08/22/2012
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 1024 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)  
		3.5"/720 kB floppy services are supported (int 13h)  
		3.5"/2.88 MB floppy services are supported (int 13h)  
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)
		ACPI is supported
		USB legacy is supported
		LS-120 boot is supported
		ATAPI Zip drive boot is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
	BIOS Revision: 8.14

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: System manufacturer
	Product Name: System Product Name
	Version: System Version
	Serial Number: System Serial Number
	UUID: xx
	Wake-up Type: Power Switch
	SKU Number: To Be Filled By O.E.M.
	Family: To Be Filled By O.E.M.