Firmware gesucht für Air Cap702i-e-k9

U-Boot 1.1.4.v5.3 (Jan 31 2013 - 12:54:33)

DRAM: 128 MB
CPU: 560 MHz
Top of RAM usable for U-Boot at: 88000000
Reserving 283k for U-Boot at: 87fb8000
Reserving 144k for malloc() at: 87f94000
Reserving 44 Bytes for Board Info at: 87f93fd4
Reserving 36 Bytes for Global Data at: 87f93fb0
Reserving 128k for boot params() at: 87f73fb0
Stack Pointer at: 87f73f98
Now running in RAM - U-Boot at: 87fb8000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x14
flash size 1MB, sector count = 64
Flash: 1 MB
Fetching MAC Address from 0x87fe3908
eth0: 28:52:61:5e:11:4a
ATHRSF1_PHY: Port 4, Neg Success
Ethernet link up - 100Mbps Full
eth0
Ether initialization ok!
Atheros on-chip NAND FLash Controller Driver, Version 0.1 (c) 2010 Atheros Communications, Ltd.
Ath Nand ID[87ff117c]: c2:f1:80:1d:c2
Macronix NAND 128MiB 3,3V 8-bit [128MB]
====== NAND Parameters ======
sc = 0x87ff1158 bbt = 0x87f98360 bbt_size = 0x100 nf_ctrl = 0x345
page = 0x800 block = 0x20000 oob = 0x40
size = 128MB
Setting 0xb8116290 to 0x28502d0f
Test Size=0x8000000, Start!!
RAM test complete!
MAC address check ok!
boot method:3
Hit "ESC" to stop autoboot: 0  
Uncompressed size: 320755 = 0x4E4F3
Loading .text @ 0x84000000 (205856 bytes)
Loading .rodata @ 0x84032420 (38368 bytes)
Loading .data @ 0x8403ba00 (3232 bytes)
Loading .data.rel.local @ 0x8403c6a0 (992 bytes)
Loading .data.rel @ 0x8403ca80 (124 bytes)
Loading .data.rel.ro.local @ 0x8403cafc (92 bytes)
Loading .data.rel.ro @ 0x8403cb58 (960 bytes)
Clearing .bss @ 0x8403cf20 (161112 bytes)
Clearing .scommon @ 0x84064478 (60 bytes)
## Starting application at 0x84000000 ...

IOS Secondary Bootloader - Starting system.
Ath Nand ID: 1d:80:f1:c2:1d
Using driver version 1 for media type 2
Valid buffers 348
total348 348
success found all blocks
start end 216 21
found in range
high low end 684 6935 21
Xmodem file system is available.
mifs[0]: 93 files, 15 directories
mifs[0]: Total bytes : 131334144
mifs[0]: Bytes used : 36663296
mifs[0]: Bytes available : 94670848
mifs[0]: mifs fsck took 0 seconds.
Base Ethernet MAC address: 28:52:61:5e:11:4a
Setup MAC....
Waiting for PHY auto negotiation to complete...Port 4 Negogiation success.
Ethernet speed is 100 Mb - FULL duplex
Setting Drop CRC Errors, Pause Frames and Length Error frames
: cfg1 0xf cfg2 0x7115
button is pressed, wait for button to be released...
button pressed for 13 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
image_recovery: Download default IOS tar image tftp:255.255.255.255/ap1g1-k9w7-tar.default

examining image...
%Error opening tftp:255.255.255.255/ap1g1-k9w7-tar.default (connection timed out)
ap: sh flash
Unknown cmd: sh

ap: dir flash
unable to stat flash/: permission denied

ap: dir flash:
Directory of flash:/

2 -rwx 354 <date> env_blabla
3 -rwx 1048 <date> blabla
4 -rwx 99296 <date> event.log
6 drwx 2048 <date> ap1g1-rcvk9w8-mx
14 drwx 2048 <date> ap1g1-k9w8-mx.ap_umr6_esc.202001101205
60 drwx 2048 <date> configs
61 -rwx 1048 <date> private-multiple-fs
62 -rwx 65 <date> env_vars
63 drwx 2048 <date> ap1g1-k9w8-mx.153-3.JF10

94672896 bytes available (36661248 bytes used)

ap: dir

List of filesystems currently registered:

flash[0]: (read-write)
xmodem[1]: (read-only)
null[2]: (read-write)
tftp[5]: (read-only)


ap: en
Unknown cmd: en

ap