Installation Vcenter Server

Hallo zusammen,

Im Einsatz sind 2 ProLiant Server gen9 vonHP. Zwei mal ESXI 6.5 altuellstes Image für diese Server installiert. Firmware ist auch die aktuellste auf den Servern. ESXI läuft also auf beiden Servern. Nun wollte ich auf einen Host, vcenter server installieren. Die DNS Einträge sind auch gesetzt (forward und reverse), trotzdem bricht die Installation schon zum zweiten Mal bei 80% ab. Die Logfiles haben mir nichts relevantes geliefert.

Hat jemand ne Ahnung an was das noch liegen könnte?
Bitte markiere auch die Kommentare, die zur Lösung des Beitrags beigetragen haben
Content-ID: 355397
Url: https://administrator.de/contentid/355397
Ausgedruckt am: 24.11.2024 um 14:11 Uhr
5 Kommentare
Neuester Kommentar
moin...
nun,
Die Logfiles haben mir nichts relevantes geliefert.
...bedeutet aber nicht das WIR nix relevantes sehen!

gut, fangen wir klein an...
wie hast du den das VCenter Setup gestartet?
als Server Windows Variante ?
als Appliance ?
auf was genau ?

Frank
ich würde ganz einfach die vcenter vma nehmen. Die wird installiert indem du von einem Windows Client der das VMware Netz erreicht das image mountest und das setup ausführst. Er installiert dann über einen Webbrowser (nimm den internet explorer...) die eigenständige vorkonfigurierte vma für das vcenter von deinem client aus auf einen der beiden Hosts. Relativ simpel.
meist scheintert die Installation an der Nicht-Erfüllung irgendwelcher Vorrausetzungen, oder es fehlen noch Patches am Server u.s.w.
ESX 5.5 hatte als RTM auch keinen funktionsfähigen Vcenter Server, der ging erst ab U1 vernünftig.
Hallo zusammen,

versucht wurde die applicance zu installieren von einem Windows 10 Rechner aus auf den HP Proliant Server. Habe hier mal ein Screen hinzugefügt wann die Installation fehlschlägt.

Hier noch die letzten Logfiles:
2017-11-20T22:57:55.305Z - debug: [540]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:05.311Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:06.314Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:06.314Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:06.314Z - debug: [541]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:16.307Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:17.307Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:17.307Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:17.307Z - debug: [542]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:27.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:28.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:28.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:28.317Z - debug: [543]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:32.319Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:58:33.303Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:58:33.303Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:58:33.303Z - debug: [538]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:58:49.304Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:50.304Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:50.304Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:50.304Z - debug: [545]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:58:54.304Z - debug: Updated current session with lstActTm Mon Nov 20 2017 23:50:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T22:59:00.316Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:01.316Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:01.316Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:01.316Z - debug: [546]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:11.308Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:12.308Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:12.308Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:12.308Z - debug: [547]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:22.319Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:23.312Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:23.312Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:23.312Z - debug: [548]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:33.313Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:34.313Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:34.313Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:34.313Z - debug: [549]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:38.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:59:39.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:59:39.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:59:39.317Z - debug: [544]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T22:59:55.307Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:56.307Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:56.307Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T22:59:56.307Z - debug: [551]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:06.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:07.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:07.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:07.317Z - debug: [552]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:17.311Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:18.311Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:18.311Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:18.311Z - debug: [553]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:28.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:29.306Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:29.306Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:29.306Z - debug: [554]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:39.314Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:40.316Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:40.316Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:40.316Z - debug: [555]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:00:44.325Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:00:45.311Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:00:45.311Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:00:45.311Z - debug: [550]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:01:01.308Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:02.308Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:02.308Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:02.308Z - debug: [557]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:12.322Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:13.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:13.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:13.322Z - debug: [558]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:23.316Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:24.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:24.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:24.317Z - debug: [559]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:34.312Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:35.307Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:35.307Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:35.307Z - debug: [560]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:45.313Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:46.314Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:46.314Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:46.314Z - debug: [561]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:01:50.315Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:01:51.315Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:01:51.315Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:01:51.315Z - debug: [556]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:02:07.315Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:08.315Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:08.315Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:08.315Z - debug: [563]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:18.310Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:19.311Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:19.311Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:19.311Z - debug: [564]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:29.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:30.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:30.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:30.317Z - debug: [565]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:40.322Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:41.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:41.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:41.322Z - debug: [566]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:51.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:52.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:52.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:52.317Z - debug: [567]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:02:56.337Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:02:57.321Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:02:57.321Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:02:57.321Z - debug: [562]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:03:13.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:14.309Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:14.309Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:14.309Z - debug: [569]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:24.316Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:25.316Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:25.316Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:25.316Z - debug: [570]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:35.311Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:36.311Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:36.311Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:36.311Z - debug: [571]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:46.315Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:47.315Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:47.315Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:47.315Z - debug: [572]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:54.321Z - debug: Updated current session with lstActTm Mon Nov 20 2017 23:55:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:03:57.310Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:58.311Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:58.311Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:03:58.311Z - debug: [573]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:02.317Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:04:03.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:04:03.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:04:03.317Z - debug: [568]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:04:19.319Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:20.320Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:20.320Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:20.320Z - debug: [575]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:30.314Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:31.314Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:31.314Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:31.314Z - debug: [576]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:41.324Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:42.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:42.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:42.324Z - debug: [577]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:52.325Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:53.310Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:53.310Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:04:53.311Z - debug: [578]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:03.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:04.312Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:04.312Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:04.312Z - debug: [579]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:08.315Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:05:09.316Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:05:09.316Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:05:09.316Z - debug: [574]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:05:25.321Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:26.321Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:26.321Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:26.321Z - debug: [581]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:36.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:37.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:37.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:37.322Z - debug: [582]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:47.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:48.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:48.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:48.324Z - debug: [583]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:58.313Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:59.317Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:59.317Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:05:59.317Z - debug: [584]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:09.325Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:10.325Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:10.325Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:10.325Z - debug: [585]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:14.329Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:06:15.314Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:06:15.314Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:06:15.314Z - debug: [580]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:06:31.321Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:32.321Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:32.321Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:32.321Z - debug: [587]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:42.318Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:43.319Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:43.319Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:43.319Z - debug: [588]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:53.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:54.313Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:54.313Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:06:54.313Z - debug: [589]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:04.323Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:05.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:05.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:05.323Z - debug: [590]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:15.318Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:16.319Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:16.319Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:16.319Z - debug: [591]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:20.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:07:21.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:07:21.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:07:21.326Z - debug: [586]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:07:37.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:38.320Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:38.320Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:38.320Z - debug: [593]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:48.316Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:49.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:49.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:49.328Z - debug: [594]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:07:59.327Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:00.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:00.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:00.327Z - debug: [595]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:10.321Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:11.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:11.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:11.324Z - debug: [596]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:21.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:22.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:22.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:22.328Z - debug: [597]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:26.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:08:27.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:08:27.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:08:27.322Z - debug: [592]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:08:43.315Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:44.315Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:44.315Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:44.315Z - debug: [599]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:54.330Z - debug: Updated current session with lstActTm Tue Nov 21 2017 00:00:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:08:54.330Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:55.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:55.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:08:55.330Z - debug: [600]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:05.324Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:06.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:06.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:06.324Z - debug: [601]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:16.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:17.320Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:17.320Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:17.320Z - debug: [602]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:27.330Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:28.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:28.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:28.330Z - debug: [603]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:32.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:09:33.319Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:09:33.319Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:09:33.319Z - debug: [598]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:09:49.325Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:50.325Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:50.325Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:09:50.325Z - debug: [605]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:00.322Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:01.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:01.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:01.322Z - debug: [606]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:11.332Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:12.332Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:12.332Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:12.332Z - debug: [607]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:22.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:23.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:23.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:23.326Z - debug: [608]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:33.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:34.320Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:34.320Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:34.320Z - debug: [609]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:38.330Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:10:39.331Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:10:39.331Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:10:39.331Z - debug: [604]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:10:55.325Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:56.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:56.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:10:56.326Z - debug: [611]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:06.320Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:07.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:07.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:07.323Z - debug: [612]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:17.331Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:18.331Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:18.331Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:18.331Z - debug: [613]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:28.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:29.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:29.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:29.327Z - debug: [614]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:39.322Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:40.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:40.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:40.322Z - debug: [615]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:11:44.330Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:11:45.331Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:11:45.331Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:11:45.331Z - debug: [610]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:12:01.321Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:02.321Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:02.321Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:02.321Z - debug: [617]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:12.332Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:13.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:13.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:13.333Z - debug: [618]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:23.327Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:24.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:24.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:24.327Z - debug: [619]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:34.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:35.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:35.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:35.328Z - debug: [620]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:45.323Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:46.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:46.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:46.323Z - debug: [621]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:12:50.340Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:12:51.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:12:51.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:12:51.324Z - debug: [616]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:13:07.322Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:08.322Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:08.322Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:08.322Z - debug: [623]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:18.335Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:19.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:19.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:19.323Z - debug: [624]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:29.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:30.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:30.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:30.327Z - debug: [625]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:40.331Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:41.335Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:41.335Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:41.335Z - debug: [626]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:51.329Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:52.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:52.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:52.330Z - debug: [627]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:13:54.333Z - debug: Updated current session with lstActTm Tue Nov 21 2017 00:05:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:13:56.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:13:57.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:13:57.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:13:57.326Z - debug: [622]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:14:13.330Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:14.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:14.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:14.330Z - debug: [629]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:24.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:25.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:25.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:25.326Z - debug: [630]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:35.323Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:36.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:36.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:36.323Z - debug: [631]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:46.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:47.334Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:47.334Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:47.334Z - debug: [632]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:57.329Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:58.329Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:58.329Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:14:58.329Z - debug: [633]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:02.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:15:03.326Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:15:03.326Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:15:03.326Z - debug: [628]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:15:19.336Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:20.336Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:20.336Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:20.336Z - debug: [635]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:30.332Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:31.332Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:31.332Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:31.332Z - debug: [636]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:41.329Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:42.329Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:42.329Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:42.329Z - debug: [637]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:52.323Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:53.323Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:53.323Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:15:53.323Z - debug: [638]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:03.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:04.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:04.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:04.337Z - debug: [639]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:08.338Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:16:09.338Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:16:09.338Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:16:09.339Z - debug: [634]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:16:25.332Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:26.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:26.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:26.333Z - debug: [641]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:36.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:37.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:37.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:37.328Z - debug: [642]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:47.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:48.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:48.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:48.333Z - debug: [643]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:58.327Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:59.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:59.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:16:59.327Z - debug: [644]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:09.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:10.324Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:10.324Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:10.324Z - debug: [645]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:14.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:17:15.335Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:17:15.335Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:17:15.335Z - debug: [640]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:17:31.332Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:32.332Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:32.332Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:32.332Z - debug: [647]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:42.327Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:43.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:43.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:43.327Z - debug: [648]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:53.338Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:54.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:54.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:17:54.339Z - debug: [649]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:04.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:05.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:05.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:05.333Z - debug: [650]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:15.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:16.329Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:16.329Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:16.329Z - debug: [651]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:20.347Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:18:21.331Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:18:21.331Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:18:21.331Z - debug: [646]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:18:37.326Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:38.327Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:38.327Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:38.327Z - debug: [653]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:48.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:49.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:49.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:49.330Z - debug: [654]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:18:54.334Z - debug: Updated current session with lstActTm Tue Nov 21 2017 00:10:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:18:59.342Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:00.342Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:00.342Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:00.342Z - debug: [655]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:10.340Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:11.340Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:11.340Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:11.340Z - debug: [656]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:21.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:22.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:22.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:22.339Z - debug: [657]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:26.328Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:19:27.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:19:27.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:19:27.328Z - debug: [652]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:19:43.337Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:44.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:44.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:44.337Z - debug: [659]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:54.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:55.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:55.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:19:55.333Z - debug: [660]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:05.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:06.340Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:06.340Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:06.340Z - debug: [661]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:16.333Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:17.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:17.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:17.333Z - debug: [662]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:27.329Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:28.329Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:28.329Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:28.329Z - debug: [663]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:32.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:20:33.334Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:20:33.334Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:20:33.334Z - debug: [658]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:20:49.343Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:50.328Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:50.328Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:20:50.328Z - debug: [665]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:00.340Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:01.340Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:01.340Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:01.340Z - debug: [666]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:11.335Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:12.343Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:12.343Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:12.343Z - debug: [667]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:22.343Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:23.330Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:23.330Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:23.330Z - debug: [668]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:33.337Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:34.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:34.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:34.337Z - debug: [669]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:38.353Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:21:39.343Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:21:39.343Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:21:39.343Z - debug: [664]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:21:55.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:56.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:56.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:21:56.339Z - debug: [671]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:06.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:07.334Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:07.334Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:07.334Z - debug: [672]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:17.331Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:18.331Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:18.331Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:18.331Z - debug: [673]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:28.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:29.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:29.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:29.339Z - debug: [674]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:39.334Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:40.334Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:40.334Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:40.334Z - debug: [675]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:22:44.337Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:22:45.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:22:45.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:22:45.337Z - debug: [670]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:23:01.341Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:02.341Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:02.341Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:02.341Z - debug: [677]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:12.336Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:13.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:13.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:13.337Z - debug: [678]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:23.347Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:24.347Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:24.347Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:24.347Z - debug: [679]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:34.345Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:35.345Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:35.345Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:35.345Z - debug: [680]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:45.338Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:46.348Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:46.348Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:46.348Z - debug: [681]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:23:50.349Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:23:51.333Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:23:51.333Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:23:51.333Z - debug: [676]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:23:54.337Z - debug: Updated current session with lstActTm Tue Nov 21 2017 00:15:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:24:07.344Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:08.341Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:08.341Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:08.341Z - debug: [683]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:18.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:19.340Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:19.340Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:19.340Z - debug: [684]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:29.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:30.336Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:30.336Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:30.336Z - debug: [685]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:40.348Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:41.349Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:41.349Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:41.349Z - debug: [686]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:51.341Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:52.341Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:52.341Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:52.341Z - debug: [687]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:24:56.348Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:24:57.348Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:24:57.348Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:24:57.348Z - debug: [682]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:25:13.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:14.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:14.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:14.346Z - debug: [689]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:24.342Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:25.342Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:25.342Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:25.342Z - debug: [690]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:35.336Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:36.336Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:36.336Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:36.336Z - debug: [691]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:46.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:47.347Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:47.347Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:47.347Z - debug: [692]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:57.340Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:58.340Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:58.340Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:25:58.340Z - debug: [693]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:02.349Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:26:03.349Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:26:03.349Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:26:03.349Z - debug: [688]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:26:19.344Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:20.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:20.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:20.346Z - debug: [695]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:30.336Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:31.343Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:31.343Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:31.343Z - debug: [696]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:41.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:42.336Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:42.336Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:42.336Z - debug: [697]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:52.350Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:53.350Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:53.350Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:26:53.350Z - debug: [698]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:03.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:04.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:04.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:04.346Z - debug: [699]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:08.354Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:27:09.338Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:27:09.338Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:27:09.338Z - debug: [694]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:27:25.339Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:26.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:26.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:26.339Z - debug: [701]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:36.350Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:37.350Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:37.350Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:37.350Z - debug: [702]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:47.360Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:48.344Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:48.344Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:48.344Z - debug: [703]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:58.352Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:59.352Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:59.352Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:27:59.352Z - debug: [704]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:09.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:10.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:10.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:10.346Z - debug: [705]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:14.349Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:28:15.337Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:28:15.337Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:28:15.337Z - debug: [700]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:28:31.338Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:32.338Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:32.338Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:32.338Z - debug: [707]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:42.349Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:43.349Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:43.349Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:43.349Z - debug: [708]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:53.341Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:54.350Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:54.350Z - debug: Updated current session with lstActTm Tue Nov 21 2017 00:20:08 GMT+0100 (Mitteleuropäische Zeit)
2017-11-20T23:28:54.350Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:28:54.350Z - debug: [709]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:04.338Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:05.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:05.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:05.346Z - debug: [710]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:15.350Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:16.353Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:16.353Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:16.353Z - debug: [711]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:20.354Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:29:21.339Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:29:21.339Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:29:21.339Z - debug: [706]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:29:37.353Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:38.353Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:38.353Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:38.353Z - debug: [713]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:48.348Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:49.349Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:49.349Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:49.349Z - debug: [714]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:29:59.343Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:00.343Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:00.343Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:00.343Z - debug: [715]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:10.351Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:11.351Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:11.351Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:11.351Z - debug: [716]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:21.347Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:22.347Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:22.347Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:22.347Z - debug: [717]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:26.353Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:30:27.353Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:30:27.353Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:30:27.353Z - debug: [712]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:30:43.348Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:44.348Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:44.348Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:44.348Z - debug: [719]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:54.346Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:55.346Z - debug: Failed to get fileTransferInfo:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:55.346Z - debug: Failed to get url of file in guest vm:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:30:55.346Z - debug: [720]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: The operation is not allowed in the current state.
2017-11-20T23:31:04.349Z - error: pollRpmInstallProgress reached timeout before completed: loopCount=721, installProgress=5
2017-11-20T23:31:04.349Z - info: Cancelling the ping timer for session mgmt
2017-11-20T23:31:32.365Z - debug: initiateFileTransferFromGuest error: ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:31:33.349Z - debug: Failed to get fileTransferInfo:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:31:33.349Z - debug: Failed to get url of file in guest vm:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).

2017-11-20T23:31:33.349Z - debug: [718]pollRpmInstallProgress:getGuestFileErr:ServerFaultCode: A general system error occurred: vix error codes = (3016, 0).
Gruß
https://knowledgelayer.softlayer.com/procedure/vmware-vsphere-6-deploy-a ...

womit installierst du ? Internetexplorer? -> muss. Firefox macht immer Probleme. Welche Version vom Browser Plugin für die Installation nutzt du? Hat dein Windows 10 Rechner ein Gateway zum Internet? Geht DNS ins Vmware Netz ? Mehr infos