Megaraid Log Auswertung

Hallo,
da ich bisher glücklicherweise wenig Erfahrung mit Störungen eines RAID Systems sammeln musste, bin ich ein bisschen unsicher was mir mein LSI MegaRAID 9271i mitteilt.
Zum Wochenbeginn hat er mich piesenderweise begrüßt. Unglücklicherweise hatte ich den MegaRaid Storage Manager nicht installiert und habe mich ins BIOS begeben. Da hat er als erstes mal bemängelt, dass eine foreign Installation nicht eingebunden werden kann. Dann habe ich einen rebuild gesehen und den durchlaufen lassen.
Als dieser nach Stunden fertig war. wollte er auch noch einen Austausch von 2 Platten. Ich denke, dass ich das aus Unwissenheit bestätigt habe. Nun tauscht er aus.
Es sind 5 SAS Festplatten installiert.
Eine ist hot spare, die zweite ist unconfiguriert.
Die anderen sind in einem RAID 10* * Verbund eingebunden.
Dann habe ich im log keinen wirklichen Auslöser gefunden.
Dafür aber, dass ein Platte von unconfigured bad nach unconfigured good wechselt und die Platte auch wieder einbindet.
Dann zeigt das Log das der VD 0 State optimal ist, aber trotzdem ein Replace begonnen wird.
Wie muss ich die Port Angaben lesen? Port 0 - 3:0:2 entspricht Slot 3. Korrekt? Was bedeuten die anderen Zahlen?
Kann jemand das Verhalten erklären? Ist das normal? Ist eine Ursache erkennbar?

Leider weiß ich nicht wie ich eine Datei anhängen kann, daher das log im Betrag.

ID = 114
SEQUENCE NUMBER = 76796
TIME = 07-11-2022 16:30:23
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 4 - 7:0:4  Previous   =   Unconfigured Good      Current   =   Copyback

ID = 281
SEQUENCE NUMBER = 76795
TIME = 07-11-2022 16:30:23
LOCALIZED MESSAGE = Controller ID:  0  Replace drive operation automatically started on PD:   Port 4 - 7:0:4  Source    PD :   Port 0 - 3:0:2

ID = 249
SEQUENCE NUMBER = 76794
TIME = 07-11-2022 16:30:23
LOCALIZED MESSAGE = Controller ID:  0  VD is now OPTIMAL   VD   0

ID = 81
SEQUENCE NUMBER = 76793
TIME = 07-11-2022 16:30:23
LOCALIZED MESSAGE = Controller ID:  0   State change on VD:   0      Previous   =   Degraded  Current   =       Optimal

ID = 114
SEQUENCE NUMBER = 76792
TIME = 07-11-2022 16:30:23
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Rebuild      Current   =   Online


--- snip ---

LOCALIZED MESSAGE = Controller ID:  0   Image version:   3.460.115-6465

ID = 0
SEQUENCE NUMBER = 76576
TIME = 09 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Firmware initialization started:       ( PCI ID   0x5b/ 0x1000/ 0x9271    / 0x1000)

ID = 42
SEQUENCE NUMBER = 76575
TIME = 07-11-2022 07:20:58
LOCALIZED MESSAGE = Controller ID:  0   Shutdown command received from host 

ID = 0
SEQUENCE NUMBER = 76605
TIME = 09 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Firmware initialization started:       ( PCI ID   0x5b/ 0x1000/ 0x9271    / 0x1000)

ID = 44
SEQUENCE NUMBER = 76604
TIME = 07-11-2022 06:51:24
LOCALIZED MESSAGE = Controller ID:  0   Time established since power on:   Time   2022-11-07, 06:51:24      78  Seconds

ID = 396
SEQUENCE NUMBER = 76603
TIME = 68 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Foreign configuration auto-import did not import any drives 

ID = 114
SEQUENCE NUMBER = 76602
TIME = 66 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Offline      Current   =   Rebuild

ID = 104
SEQUENCE NUMBER = 76601
TIME = 66 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Rebuild resumed:   PD   Port 0 - 3:0:2

ID = 114
SEQUENCE NUMBER = 76600
TIME = 66 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Rebuild      Current   =   Offline

ID = 132
SEQUENCE NUMBER = 76599
TIME = 66 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Dedicated Hot Spare created:   PD   Port 4 - 7:0:6

ID = 247
SEQUENCE NUMBER = 76598
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   38

ID = 91
SEQUENCE NUMBER = 76597
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:4

ID = 247
SEQUENCE NUMBER = 76596
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   37

ID = 91
SEQUENCE NUMBER = 76595
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:6

ID = 247
SEQUENCE NUMBER = 76594
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   36

ID = 91
SEQUENCE NUMBER = 76593
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:2

ID = 247
SEQUENCE NUMBER = 76592
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   35

ID = 91
SEQUENCE NUMBER = 76591
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:5

ID = 247
SEQUENCE NUMBER = 76590
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   34

ID = 91
SEQUENCE NUMBER = 76589
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:0

ID = 247
SEQUENCE NUMBER = 76588
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   33

ID = 91
SEQUENCE NUMBER = 76587
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:1

ID = 247
SEQUENCE NUMBER = 76586
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   32

ID = 91
SEQUENCE NUMBER = 76585
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:3

ID = 247
SEQUENCE NUMBER = 76584
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   27

ID = 91
SEQUENCE NUMBER = 76583
TIME = 57 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:7

ID = 149
SEQUENCE NUMBER = 76582
TIME = 18 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Battery temperature is normal

ID = 242
SEQUENCE NUMBER = 76581
TIME = 18 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Battery charge complete

ID = 266
SEQUENCE NUMBER = 76580
TIME = 13 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Board Revision:   28A

ID = 261
SEQUENCE NUMBER = 76579
TIME = 13 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0  Package version   23.34.0-0019

ID = 141
SEQUENCE NUMBER = 76578
TIME = 13 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Battery Present

ID = 1
SEQUENCE NUMBER = 76577
TIME = 09 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Image version:   3.460.115-6465

ID = 0
SEQUENCE NUMBER = 76576
TIME = 09 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Firmware initialization started:       ( PCI ID   0x5b/ 0x1000/ 0x9271    / 0x1000)

ID = 42
SEQUENCE NUMBER = 76575
TIME = 07-11-2022 07:20:58
LOCALIZED MESSAGE = Controller ID:  0   Shutdown command received from host 

ID = 331
SEQUENCE NUMBER = 76542
TIME = 07-11-2022 03:21:29
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 4 - 7:0:6  Previous   =   On  Current   =   Powersave

ID = 114
SEQUENCE NUMBER = 76540
TIME = 07-11-2022 03:14:12
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 4 - 7:0:4  Previous   =   Unconfigured Bad      Current   =   Unconfigured Good

ID = 247
SEQUENCE NUMBER = 76539
TIME = 07-11-2022 03:14:12
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   38

ID = 91
SEQUENCE NUMBER = 76538
TIME = 07-11-2022 03:14:12
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:4

ID = 114
SEQUENCE NUMBER = 76537
TIME = 07-11-2022 03:13:28
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:4  Previous   =   Unconfigured Good      Current   =   Unconfigured Bad

ID = 248
SEQUENCE NUMBER = 76536
TIME = 07-11-2022 03:13:28
LOCALIZED MESSAGE = Controller ID:  0  Device removed   Device Type:       Disk  Device Id:   38

ID = 112
SEQUENCE NUMBER = 76535
TIME = 07-11-2022 03:13:28
LOCALIZED MESSAGE = Controller ID:  0   PD removed:   Port 0 - 3:0:4

ID = 268
SEQUENCE NUMBER = 76534
TIME = 07-11-2022 03:13:28
LOCALIZED MESSAGE = Controller ID:  0  PD Reset:   PD       =   Port 0 - 3:0:4,   Critical       =   3,   Path   =       0x5000CCA2614D1D49

ID = 114
SEQUENCE NUMBER = 76532
TIME = 07-11-2022 03:04:54
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 4 - 7:0:4  Previous   =   Unconfigured Bad      Current   =   Unconfigured Good

ID = 247
SEQUENCE NUMBER = 76531
TIME = 07-11-2022 03:04:54
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   38

ID = 91
SEQUENCE NUMBER = 76530
TIME = 07-11-2022 03:04:54
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:4

ID = 114
SEQUENCE NUMBER = 76528
TIME = 07-11-2022 03:04:22
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:4  Previous   =   Unconfigured Good      Current   =   Unconfigured Bad

ID = 248
SEQUENCE NUMBER = 76527
TIME = 07-11-2022 03:04:22
LOCALIZED MESSAGE = Controller ID:  0  Device removed   Device Type:       Disk  Device Id:   38

ID = 112
SEQUENCE NUMBER = 76526
TIME = 07-11-2022 03:04:22
LOCALIZED MESSAGE = Controller ID:  0   PD removed:   Port 0 - 3:0:4

ID = 268
SEQUENCE NUMBER = 76525
TIME = 07-11-2022 03:04:22
LOCALIZED MESSAGE = Controller ID:  0  PD Reset:   PD       =   Port 0 - 3:0:4,   Critical       =   3,   Path   =       0x5000CCA2614D1D49

ID = 389
SEQUENCE NUMBER = 76523
TIME = 07-11-2022 02:51:30
LOCALIZED MESSAGE = Controller ID:  0  Host driver is loaded and operational

ID = 396
SEQUENCE NUMBER = 76522
TIME = 07-11-2022 02:51:30
LOCALIZED MESSAGE = Controller ID:  0  Foreign configuration auto-import did not import any drives 

ID = 114
SEQUENCE NUMBER = 76521
TIME = 07-11-2022 02:51:27
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Offline      Current   =   Rebuild

ID = 104
SEQUENCE NUMBER = 76520
TIME = 07-11-2022 02:51:27
LOCALIZED MESSAGE = Controller ID:  0   Rebuild resumed:   PD   Port 0 - 3:0:2

ID = 114
SEQUENCE NUMBER = 76519
TIME = 07-11-2022 02:51:27
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Rebuild      Current   =   Offline

ID = 132
SEQUENCE NUMBER = 76518
TIME = 07-11-2022 02:51:27
LOCALIZED MESSAGE = Controller ID:  0   Dedicated Hot Spare created:   PD   Port 4 - 7:0:6

ID = 367
SEQUENCE NUMBER = 76517
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  COD on PD updated as it was stale.   PD :   Port 4 - 7:0:6

ID = 227
SEQUENCE NUMBER = 76516
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   Controller Hot Plug detected

ID = 247
SEQUENCE NUMBER = 76515
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   38

ID = 91
SEQUENCE NUMBER = 76514
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:4

ID = 247
SEQUENCE NUMBER = 76513
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   37

ID = 91
SEQUENCE NUMBER = 76512
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:6

ID = 247
SEQUENCE NUMBER = 76511
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   36

ID = 91
SEQUENCE NUMBER = 76510
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:2

ID = 247
SEQUENCE NUMBER = 76509
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   35

ID = 91
SEQUENCE NUMBER = 76508
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:5

ID = 247
SEQUENCE NUMBER = 76507
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   34

ID = 91
SEQUENCE NUMBER = 76506
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:0

ID = 247
SEQUENCE NUMBER = 76505
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   33

ID = 91
SEQUENCE NUMBER = 76504
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:1

ID = 247
SEQUENCE NUMBER = 76503
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   32

ID = 91
SEQUENCE NUMBER = 76502
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 0 - 3:0:3

ID = 247
SEQUENCE NUMBER = 76501
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0  Device inserted   Device Type:       Disk  Device Id:   27

ID = 91
SEQUENCE NUMBER = 76500
TIME = 07-11-2022 02:51:25
LOCALIZED MESSAGE = Controller ID:  0   PD inserted:   Port 4 - 7:0:7

ID = 149
SEQUENCE NUMBER = 76499
TIME = 07-11-2022 02:51:10
LOCALIZED MESSAGE = Controller ID:  0   Battery temperature is normal

ID = 242
SEQUENCE NUMBER = 76498
TIME = 07-11-2022 02:51:10
LOCALIZED MESSAGE = Controller ID:  0   Battery charge complete

ID = 266
SEQUENCE NUMBER = 76497
TIME = 07-11-2022 02:51:05
LOCALIZED MESSAGE = Controller ID:  0  Board Revision:   28A

ID = 261
SEQUENCE NUMBER = 76496
TIME = 07-11-2022 02:51:05
LOCALIZED MESSAGE = Controller ID:  0  Package version   23.34.0-0019

ID = 141
SEQUENCE NUMBER = 76495
TIME = 07-11-2022 02:51:05
LOCALIZED MESSAGE = Controller ID:  0   Battery Present

ID = 345
SEQUENCE NUMBER = 76494
TIME = 07-11-2022 02:51:02
LOCALIZED MESSAGE = Controller ID:  0  Controller encountered a fatal error and was reset

ID = 1
SEQUENCE NUMBER = 76493
TIME = 02 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Image version:   3.460.115-6465

ID = 0
SEQUENCE NUMBER = 76492
TIME = 02 seconds from reboot
LOCALIZED MESSAGE = Controller ID:  0   Firmware initialization started:       ( PCI ID   0x5b/ 0x1000/ 0x9271    / 0x1000)

ID = 114
SEQUENCE NUMBER = 76491
TIME = 07-11-2022 02:50:30
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:2  Previous   =   Hot Spare      Current   =   Rebuild

ID = 106
SEQUENCE NUMBER = 76490
TIME = 07-11-2022 02:50:30
LOCALIZED MESSAGE = Controller ID:  0   Rebuild automatically started:   PD   Port 0 - 3:0:2

ID = 405
SEQUENCE NUMBER = 76489
TIME = 07-11-2022 02:50:30
LOCALIZED MESSAGE = Controller ID:  0  PD commissioned as Emergency spare   Port 0 - 3:0:2

ID = 331
SEQUENCE NUMBER = 76488
TIME = 07-11-2022 02:50:28
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 0 - 3:0:2  Previous   =   Transition  Current   =   On

ID = 268
SEQUENCE NUMBER = 76487
TIME = 07-11-2022 02:50:10
LOCALIZED MESSAGE = Controller ID:  0  PD Reset:   PD       =   -:-:0,   Critical       =   3,   Path   =       0x5000CCA2614D1D49

ID = 114
SEQUENCE NUMBER = 76486
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:4  Previous   =   Failed      Current   =   Unconfigured Bad

ID = 331
SEQUENCE NUMBER = 76485
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 0 - 3:0:2  Previous   =   Powersave  Current   =   Transition

ID = 331
SEQUENCE NUMBER = 76484
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 4 - 7:0:6  Previous   =   Powersave  Current   =   Transition

ID = 251
SEQUENCE NUMBER = 76483
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0  VD is now DEGRADED   VD   0

ID = 81
SEQUENCE NUMBER = 76482
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0   State change on VD:   0      Previous   =   Optimal  Current   =       Degraded

ID = 114
SEQUENCE NUMBER = 76481
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0   State change:   PD       =   Port 0 - 3:0:4  Previous   =   Online      Current   =   Failed

ID = 248
SEQUENCE NUMBER = 76480
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0  Device removed   Device Type:       Disk  Device Id:   38

ID = 112
SEQUENCE NUMBER = 76479
TIME = 07-11-2022 02:49:58
LOCALIZED MESSAGE = Controller ID:  0   PD removed:   Port 0 - 3:0:4

ID = 268
SEQUENCE NUMBER = 76478
TIME = 07-11-2022 02:49:57
LOCALIZED MESSAGE = Controller ID:  0  PD Reset:   PD       =   Port 0 - 3:0:4,   Critical       =   3,   Path   =       0x5000CCA2614D1D49

ID = 331
SEQUENCE NUMBER = 76477
TIME = 06-11-2022 15:02:31
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 4 - 7:0:6  Previous   =   On  Current   =   Powersave

ID = 331
SEQUENCE NUMBER = 76476
TIME = 06-11-2022 15:02:31
LOCALIZED MESSAGE = Controller ID:  0  Power state change on PD   =   Port 0 - 3:0:2  Previous   =   On  Current   =   Powersave

Bitte markiere auch die Kommentare, die zur Lösung des Beitrags beigetragen haben

Content-ID: 4538959903

Url: https://administrator.de/forum/megaraid-log-auswertung-4538959903.html

Ausgedruckt am: 22.12.2024 um 08:12 Uhr

2 Kommentare

Neuester Kommentar

Zitat von @dmeier:

Hallo,
da ich bisher glücklicherweise wenig Erfahrung mit Störungen eines RAID Systems sammeln musste, bin ich ein bisschen unsicher was mir mein LSI MegaRAID 9271i mitteilt.
Zum Wochenbeginn hat er mich piesenderweise begrüßt. Unglücklicherweise hatte ich den MegaRaid Storage Manager nicht installiert und habe mich ins BIOS begeben. Da hat er als erstes mal bemängelt, dass eine foreign Installation nicht eingebunden werden kann. Dann habe ich einen rebuild gesehen und den durchlaufen lassen.
Als dieser nach Stunden fertig war. wollte er auch noch einen Austausch von 2 Platten. Ich denke, dass ich das aus Unwissenheit bestätigt habe. Nun tauscht er aus.
Es sind 5 SAS Festplatten installiert.
Eine ist hot spare, die zweite ist unconfiguriert.
Die anderen sind in einem RAID 10* * Verbund eingebunden.
Dann habe ich im log keinen wirklichen Auslöser gefunden.
Dafür aber, dass ein Platte von unconfigured bad nach unconfigured good wechselt und die Platte auch wieder einbindet.
Dann zeigt das Log das der VD 0 State optimal ist, aber trotzdem ein Replace begonnen wird.
Wie muss ich die Port Angaben lesen? Port 0 - 3:0:2 entspricht Slot 3. Korrekt? Was bedeuten die anderen Zahlen?
Kann jemand das Verhalten erklären? Ist das normal? Ist eine Ursache erkennbar?

Leider weiß ich nicht wie ich eine Datei anhängen kann, daher das log im Betrag.

ID = 114
SEQUENCE NUMBER = 76796

Hallo,

Dein LOG ist sehr lang bzw. hat sehr (extrem) viele Einträge. Siehe auch deine

SEQUENCE NUMBER = 76796

Im LOG Steht einfach alles, also filtern. Dann werde dir klar das ein RAID 10 mit einem LSI mehr als nur eine SATA 5400 RPM Platte ist und schon bei der OS Wahl berücksichtigt werden sollte. Einfach eibauen und überall OK drücken ist daher eine schlechte wahl (wie du ja jetzt selbst feststellst). Also vorher mit bescäftigen und lernen was LSI dort wie und warum und womit umgesetzt hat. Andere Hersteller nutzen andere Bezeichnungen usw,, ist aber eigentlich alles gleich.

https://www.broadcom.com/support/knowledgebase/1211161497179/locate-and- ...
https://www.broadcom.com/support/knowledgebase/1211161503520/direct-mode ...
https://www.broadcom.com/support/knowledgebase/1211161503476/virtual-dri ...
https://www.broadcom.com/support/knowledgebase/1211161503278/one-disk-is ...
https://docs.broadcom.com/doc/12353227

Lesen, Lernen, Verstehen

Gruß,
Peter

Danke für die links.

Den User Guide habe ich natürlich gelesen bevor ich den Controller eingebaut habe.
Und OpenSuSE Leap 15.2 ist denke ich nicht so falsch als OS.

Gruß
Dirk

Frage Serverhardware

Mehr von dmeier

UEFI BIOS auf Firmware Rootkit prüfendmeier - 7 Kommentare

Linux Server Energiesparmodusdmeier - 5 Kommentare

Megaraid 9271-8i, finde Fehler nichtdmeier

Bintec RS353jV VPN zu Android 13 IKEV2dmeier - 4 Kommentare

Heiß diskutiert